Lavish Ceramic Foam
라비쉬 세라믹 폼
Lavish Ceramic Foam is an SiO₂-infused snow foam that deposits a durable ceramic protection layer during the wash process — no curing time required. Its thick, clinging foam bonds chemically to paint, vinyl, glass, wheels, and trim, creating a hydrophobic barrier that causes water to bead and sheet off instantly. Providing up to 6 months of protection per application, it can be used as a standalone coating or as a top-up over existing ceramic layers.
라비쉬 세라믹 폼은 세차 과정에서 SiO₂ 세라믹 보호막을 형성하는 스노우 폼으로, 별도의 경화 시간이 필요하지 않습니다. 두껍고 밀착력 있는 폼이 도장면, 비닐랩, 유리, 휠, 트림에 화학적으로 결합해 강력한 발수 장벽을 만들며, 물이 즉시 흘러내리는 물방울 맺힘 효과를 제공합니다. 1회 도포로 최대 6개월의 보호 효과를 제공하며, 단독 코팅 또는 기존 세라믹 코팅 위의 유지 보수 제품으로 사용할 수 있습니다.
- Brand
- Auto Finesse
- Categories
- Exterior : Foam, Exterior : Coating
- Primary dilution
- 1:10~1:20
- pH
- neutral (6)
Key features
- SiO₂ ceramic protection applied during the wash stage
- Up to 6 months durability per application
- Thick, high-foaming formula for full surface coverage
- Creates a hydrophobic barrier on paint, glass, wheels, and trim
- No curing time — rinse-off application
- Compatible with existing ceramic coatings as a top-up
Dilution
- Exterior : Foam — 1:10~1:20 (1:10-20) (primary)
Usage
- After completing your regular pre-wash and contact wash, pour 50–100ml of Lavish into your snow foam lance bottle and top up with water.
- Shake the lance well and attach it to your pressure washer.
- Apply the foam generously from bottom to top, covering all panels, wheels, and glass surfaces while the vehicle is still wet.
- Allow to dwell for 1–2 minutes while the ceramic formula bonds to the surfaces.
- Rinse thoroughly with high-pressure water.
- Dry the vehicle as normal using a suitable microfibre drying towel.
핵심 특징
- 세차 단계에서 적용되는 SiO₂ 세라믹 보호
- 1회 도포로 최대 6개월 내구성
- 두꺼운 고발포 폼으로 전체 표면 커버
- 도장면, 유리, 휠, 트림에 발수 장벽 형성
- 경화 시간 불필요 — 헹굼으로 마무리
- 기존 세라믹 코팅 위의 유지 보수에도 적합
사용법
- 일반 사전 세차와 접촉 세차를 마친 후, 스노우 폼 랜스 병에 라비쉬 50~100ml를 넣고 물로 채웁니다.
- 랜스를 잘 흔든 뒤 고압 세척기에 연결합니다.
- 차량이 젖어 있는 상태에서 아래에서 위로 모든 패널, 휠, 유리면에 폼을 풍성하게 도포합니다.
- 세라믹 성분이 표면에 결합될 수 있도록 1~2분간 방치합니다.
- 고압 물로 충분히 헹굽니다.
- 적합한 마이크로파이버 건조 타월로 차량을 평소처럼 건조합니다.
Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Lavish Ceramic Foam, AF Lavish Ceramic Foam, Lavish, Auto Finesse Lavish, AF Lavish, LCF, Auto Finesse LCF, AF LCF, 오토 피네스 라비쉬, 오토 피네스 LCF
한국어로 보기