Carbon
카본
Carbon is ULTRACOAT's entry-level SiO₂ ceramic paint coating, offering up to twelve months of protection from a single layer. It can be applied in a second layer for extended durability and is formulated for ease of outdoor application, making it a practical step up from wax.
Carbon은 ULTRACOAT의 SiO₂ 세라믹 페인트 코팅 입문 제품으로, 단 한 레이어로 최대 12개월의 보호 효과를 제공합니다. 두 번째 레이어를 추가해 내구성을 더욱 높일 수 있으며, 실외 작업에 적합하게 설계되어 왁스보다 한 단계 향상된 보호를 원할 때 선택하기 좋은 제품입니다.
- Brand
- Ultra Coat
- Categories
- Exterior : Coating
Key features
- SiO₂-based ceramic paint protection
- Up to 12 months durability from single layer
- Two-layer option for extended protection
- Designed for easy outdoor application
- Entry-level step up from wax
Usage
- Wash the vehicle thoroughly and perform full decontamination.
- Machine-polish the paint to achieve a defect-free finish.
- Degrease the surface with Ultracoat Finest Wipe or an IPA wipe.
- Place a few drops of the product on the applicator pad.
- Spread the coating across a 50 × 50 cm section using a cross-hatch pattern.
- Wait 30–60 seconds for the solvents to flash off, then gently remove residue with a soft microfibre cloth.
- Repeat over the entire vehicle. For enhanced results, apply a second layer after 1 hour.
- Leave the vehicle for 24 hours to cure; avoid washing with chemicals for 7 days.
핵심 특징
- SiO₂ 기반 세라믹 도장 보호
- 단일 레이어로 최대 12개월 내구성
- 이중 레이어로 보호 기간 연장 가능
- 실외 시공에 적합하게 설계
- 왁스 대비 향상된 입문 코팅 제품
사용법
- 차량을 완전히 세차하고 탈오염 처리합니다.
- 도장면의 결점이 없는 마무리를 위해 기계 폴리싱을 진행합니다.
- Ultracoat Finest Wipe 또는 IPA 와이프로 표면을 탈지합니다.
- 도포 패드에 제품을 몇 방울 올립니다.
- 격자 패턴으로 50 × 50 cm 구역에 코팅을 펴 바릅니다.
- 30~60초 후 용제가 증발하면 부드러운 마이크로파이버 천으로 잔여물을 부드럽게 닦아냅니다.
- 차량 전체에 반복합니다. 향상된 효과를 원하면 1시간 후 두 번째 레이어를 적용합니다.
- 24시간 경화시키고, 시공 후 7일간 화학 세제로 세차하지 않습니다.
Also known as: 울트라, 울트라코트, ultra, Ultra Coat Carbon, ULTRACOAT Carbon, 울트라코트 카본
한국어로 보기
Sources