Ultra Coat APC+ Dilution Ratios & User Guide

Ultra Coat APC+ dilution ratio and pH specification chart

에이피씨 플러스

Ultra Coat APC+ — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:4~1:40. At 1:4, mix about 250 ml of Ultra Coat APC+ per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/ultra-coat/apc-plus

Ultra Coat 에이피씨 플러스 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:4~1:40. 1:4 기준 물 1L당 Ultra Coat 에이피씨 플러스 약 250ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/ultra-coat/apc-plus

APC+ is a highly concentrated, multi-surface all-purpose cleaner suitable for both exterior and interior vehicle components. It effectively dissolves and lifts dirt from treated surfaces, making cleaning fast and straightforward. The formula is efficient and safe for surfaces, and features a pleasant fruity scent.

APC+는 고농축 다목적 클리너로, 차량 외장과 내장 모두에 사용할 수 있습니다. 오염물을 효과적으로 분해하고 표면에서 분리시켜 빠르고 쉽게 세정할 수 있습니다. 표면에 안전하며 상쾌한 과일 향이 작업을 더욱 즐겁게 합니다.

Brand
Ultra Coat
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:4~1:40
pH
alkali (12)
Last updated
2026-07-06

How it works

  • Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
  • Alkaline cleaning — Alkaline chemistry that breaks down grease; can stain aluminium and matte finishes.
  • Cleaning surfactant — Lifts soil off the surface and disperses it in water.
  • nonionic surfactants — Ionic types of the surfactants used in this product.
  • Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.

Disclosed ingredients

IngredientCASFunction
2-(2-Butoxyethoxy)ethanol (butyl diglycol)112-34-5Solvent
Sodium 2-ethylhexyl sulfate126-92-1Hydrotrope
Sodium metasilicate pentahydrate10213-79-3Alkaline active
Isotridecanol, ethoxylated (EO/PO)9043-30-5Nonionic surfactant
Tetrasodium EDTA64-02-8Chelating agent
Potassium hydroxide1310-58-3Alkaline active
d-Limonene5989-27-5Solvent
Orange terpenes (sweet orange oil terpenes)8028-48-6Solvent
Linalool78-70-6Fragrance

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Highly concentrated formula
  • Multi-surface compatibility (interior and exterior)
  • Effective dirt dissolution and separation
  • Pleasant fruity scent
  • Safe for treated surfaces

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:4~1:401:4-40

Usage

  1. Prepare a diluted working solution appropriate to the level of soiling.
  2. Apply the solution to the surface and agitate with a brush, sponge, or microfibre cloth.
  3. Remove loosened dirt and product residue with a clean cloth or rinse with water.
  4. Repeat steps 1-3 if necessary for heavily soiled areas.

핵심 특징

  • 고농축 포뮬러
  • 내외장 다목적 사용 가능
  • 오염물 효과적 분해 및 제거
  • 상쾌한 과일 향
  • 표면에 안전한 성분

사용법

  1. 오염 정도에 맞게 희석 용액을 준비합니다.
  2. 브러시, 스펀지 또는 마이크로파이버 천으로 표면에 제품을 도포하고 문질러 줍니다.
  3. 깨끗한 천으로 오염물과 잔여물을 닦아내거나 물로 헹궈 냅니다.
  4. 심한 오염이 있는 경우 1~3단계를 반복합니다.

Also known as: 울트라, 울트라코트, ultra, ULTRACOAT APC+, Ultra Coat APC+, UC APC+, 울트라코트 에이피씨 플러스

한국어로 보기

Sources

  • Ultra Coat official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from Ultra Coat

  • Glass Cleaner
  • Shampoo+
  • Iron+
  • Gentle Buff
  • Soft Touch
  • Aurora

More Pre-washing (Pretreatment) products

  • EZ Car Care Citrus Wash
  • MAFRA MANIAC LINE Insect Remover
  • Mile Deep RELEASE | Concentrated Citrus Pre-Wash
  • Ganbass BP-98
  • Auto Finesse Dynamite Traffic Film Remover
  • Ganbass ION-PRE-WASH BASEFLOCK

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)