TAC System View Coat Dilution Ratios & User Guide
뷰 코트
TAC System View Coat — Exterior : Glass Sealant. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/tac-system/view-coat
TAC System 뷰 코트 — Exterior : Glass Sealant. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/tac-system/view-coat
A glass coating that makes water repel from all glass surfaces, so droplets slide away once the car is moving from around 30 mph. It also reduces dust and grime staining on the windscreen, which helps visibility. The formula combines silica, hydrocarbon, titanium, zirconium and fluorine chemistry.
모든 유리 표면에 발수 효과를 부여해 시속 약 50km 이상에서 물방울이 저절로 흘러내리게 하는 유리 코팅제입니다. 앞유리에 먼지와 오염이 덜 달라붙게 해 시야 확보에도 도움이 됩니다. 실리카와 탄화수소, 티타늄, 지르코늄, 불소 화학을 조합한 배합입니다.
- Brand
- TAC System
- Categories
- Exterior : Glass Sealant
- Primary dilution
- RTU
- Last updated
- 2026-09-11
Key features
- Water repellent glass coating
- Droplets slide away from around 30 mph
- Reduces dust and grime staining
- Improves wet weather visibility
- Silica, titanium, zirconium and fluorine chemistry
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Glass Sealant (primary) | RTU | 1:0 |
Usage
- Thoroughly clean the glass (e.g. with Ultra Foam) to remove surface contamination.
- Use TAC System Glass Polish with a hand block to remove bonded contamination and residue, then ensure glass is clean and dry.
- Apply 5-7 drops of View Coat to prime the applicator, then add ~3 drops per remaining window.
- Spread evenly and let the coating flash for 30-60 seconds.
- Level the coating over the whole window with a long-nap microfibre.
- Flip the towel or use a short-nap microfibre to buff off any remaining residue to a clear finish.
핵심 특징
- 유리용 발수 코팅제
- 시속 약 50km부터 물방울이 흘러내림
- 먼지와 오염 침착 감소
- 우천 시 시야 확보에 도움
- 실리카, 티타늄, 지르코늄, 불소 배합
사용법
- Thoroughly clean the glass (e.g. with Ultra Foam) to remove surface contamination.
- Use TAC System Glass Polish with a hand block to remove bonded contamination and residue, then ensure glass is clean and dry.
- Apply 5-7 drops of View Coat to prime the applicator, then add ~3 drops per remaining window.
- Spread evenly and let the coating flash for 30-60 seconds.
- Level the coating over the whole window with a long-nap microfibre.
- Flip the towel or use a short-nap microfibre to buff off any remaining residue to a clear finish.
Also known as: TAC System View Coat, TACSYSTEM View Coat, TAC View Coat, VC, TAC System VC, TAC VC, 탁시스템 뷰 코트, 탁시스템 VC
Sources
Related products
More from TAC System
More Glass Sealant products
- NANOSKIN RAIN
- P&S Inspiration VUE Glass Coating 30ML
- Tershine Magnify
- SENSHA View Clear
- MAFRA MANIAC LINE Rain Speed
- Nasiol GlasShield