Stjärnagloss 스뇌 엑스 희석비 & 사용 가이드

Stjärnagloss 스뇌 엑스 희석비 pH 스펙 카드

Sno X

스뇌 엑스는 일반 스노우 폼의 두꺼운 점착력과 노면 오염을 제거하는 전처리제의 강력한 세정력을 결합한 초고농축 전처리 스노우 폼입니다. 스노우 폼 캐논으로 분사하면 수직 패널에 오래 머무르며 접촉 세차 전에 오염물을 들어 올립니다. pH 중성이 아닌 강알칼리성이라 일반 스뇌보다 세정력이 강하므로 도장면에서 마르도록 두어서는 안 됩니다.

브랜드
Stjärnagloss
카테고리
Exterior : Pre-washing (Pretreatment), Exterior : Foam
기본 희석 비율
1:10~1:20
pH
alkali (13)
최종 업데이트
2026-05-31

핵심 특징

희석 비율

용도희석비율
Exterior : Foam (기본)1:10~1:201:10-20

사용법

  1. 1L 폼 캐논 보틀에 농축액 50~100ml를 넣고 물로 채우며, 오염이 심한 차량에는 더 진한 비율을 사용합니다.
  2. 130bar 이상의 고압 세척기에 연결한 전문가용 스노우 폼 캐논으로 분사합니다.
  3. 가장 오염이 심한 하단 패널에 거품이 오래 머물도록 아래에서 위로 분사합니다.
  4. 거품을 몇 분간 머무르게 하되 마르지 않게 하고, 직사광선은 피합니다.
  5. 거품이 마르기 전에 모든 표면을 충분히 헹굽니다.

Snö X is a hyper-concentrated intensive snow foam pre-wash that pairs the thick cling of a classic snow foam with the deep-cleaning strength of a traffic-film pre-wash. Sprayed through a snow foam cannon, it clings to vertical panels with long dwell time to lift dirt before contact washing. It is strongly alkaline rather than pH-neutral, so it cleans harder than regular Snö and must never be left to dry on the paint.

Key features

  • Hyper-concentrated pre-wash snow foam
  • Thick foam clings with long dwell time
  • Strong cleaning for heavy soiling and winter film
  • Strongly alkaline, not pH-neutral
  • Optimised for 130bar+ foam cannon use

Usage

  1. Add 50 to 100ml of concentrate to a 1 litre foam cannon flask and top up with water, using the stronger mix on heavily soiled vehicles.
  2. Apply through a professional snow foam cannon driven by a pressure washer of 130bar or more.
  3. Spray from the bottom upwards so the foam dwells longest on the dirtiest lower panels.
  4. Let the foam dwell for a few minutes, but do not allow it to dry; avoid direct sunlight.
  5. Rinse all surfaces thoroughly before the foam dries.

다른 이름: stjarnagloss, Snö X, Stjärnagloss Snö X, 셰르나글로스 스뇌 엑스

View in English

출처

관련 제품

Stjärnagloss의 다른 제품

같은 카테고리(Pre-washing (Pretreatment)) 제품

더 보기