Polish+Wax Color black
폴리시+왁스 컬러 블랙
A medium-cut polish enriched with colour pigments and carnauba wax for tackling new or lightly dulled paint in a single pass. It smooths, polishes, and waxes standard and metallic finishes simultaneously, while the pigments mask minor scratches and protect against corrosion. Genuine natural carnauba wax delivers vivid colour, a high-gloss result, and durable weather resistance.
컬러 안료와 카나우바 왁스를 함유한 미디엄 폴리시로, 신차 또는 가볍게 광택이 떨어진 도장을 한 번에 연마·광택·왁싱 처리합니다. 일반 도장과 메탈릭 도장 모두에 적용 가능하며, 안료가 잔 스크래치를 메우고 부식을 억제합니다. 천연 카나우바 왁스가 선명한 색감과 하이 글로스, 장기 기후 저항 보호를 한꺼번에 제공합니다.
- Brand
- Sonax
- Categories
- Exterior : Polishes, Exterior : Coating
Key features
- Medium polish with colour pigments and carnauba wax for new or lightly dulled paint
- Smooths, polishes, and waxes standard and metallic paint in one pass
- Colour pigments mask minor scratches and guard against corrosion
Usage
- Wash the vehicle thoroughly with a pH-neutral car shampoo and dry it before starting.
- Pre-treat uncoated plastic and rubber trim with a trim protectant to simplify polish residue removal later.
- Shake the bottle well before each use to homogenise the product.
- Apply a thin, even amount to a polish applicator pad and work it into the paint immediately using light pressure.
- Work one complete body section at a time, such as the bonnet or roof, without stopping mid-panel.
- Allow the polish to haze briefly, then buff it off with a clean exterior microfibre cloth.
- Keep the product away from bare plastic trim, rubber parts, and glass surfaces.
- Do not apply to surfaces that are warm or hot.
- Protect the unused product from frost.
핵심 특징
- 컬러 안료와 카나우바 왁스 함유 미디엄 폴리시, 신차 및 가볍게 산화된 도장에 적합
- 일반·메탈릭 도장 한 번에 연마·광택·왁싱
- 컬러 안료로 잔 스크래치 커버 및 부식 방지
사용법
- 시작 전 차량을 중성 카 샴푸로 깨끗이 세차하고 완전히 건조하세요.
- 미도장 플라스틱·고무 트림은 트림 프로텍턴트로 미리 처리해 나중에 폴리시 잔여물 제거를 쉽게 하세요.
- 사용 전마다 용기를 잘 흔들어 내용물을 균일하게 섞어 주세요.
- 어플리케이터 패드에 얇게 펴 발라 가벼운 압력으로 즉시 도장면에 문질러 주세요.
- 보닛, 루프 등 하나의 패널 구간씩 중간에 멈추지 않고 한 번에 작업하세요.
- 잠시 건조해 뿌옇게 변하면 깨끗한 외장용 극세사 천으로 버핑해 닦아내세요.
- 미도장 플라스틱 트림, 고무 부품, 유리에는 제품이 닿지 않도록 하세요.
- 표면이 따뜻하거나 뜨거울 때는 사용하지 마세요.
- 미사용 제품은 동결되지 않도록 보관하세요.