CarPro MetalliCut Dilution Ratios & User Guide
메탈리컷
CarPro MetalliCut — Exterior : Polishes, alkali pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/carpro/metallicut
CarPro 메탈리컷 — Exterior : Polishes, pH alkali. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/carpro/metallicut
MetalliCut is a professional metal polish combining diamond abrasive powders with diminishing abrasive compounds to rapidly cut through oxidation and imperfections while finishing to a brilliant gloss. It works on stainless steel, aluminum, chrome, and a wide range of other metals by machine or by hand.
다이아몬드 연마 분말과 점감성 연마 화합물을 결합한 전문가용 금속 연마제로, 산화 및 표면 결함을 빠르게 제거하고 선명한 광택을 냅니다. 기계 및 수작업 모두 가능하며, 스테인리스강, 알루미늄, 크롬 등 다양한 금속에 효과적입니다.
- Brand
- CarPro
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- pH
- alkali (10)
- Where to buy
- Search on Amazon (US)
- Seen in use
- Exterior Deep Clean of a DIRTY Audi A6 Avant — Vermijl Car Detail
- Seen in use
- Deep Cleaning a BMW E30 - Xmas Lights Removal & Detail — Vermijl Car Detail
- Last updated
- 2026-08-16
How it works
- Petroleum solvent — Dissolves tar and grease; best not left to dwell on paint.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Distillates (petroleum), hydrotreated light | 64742-47-8 | Solvent |
| Paraffin oils | 8012-95-1 | Emollient |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Diamond abrasive powders
- Diminishing abrasive compound system
- Fast cutting action with high-gloss finish
- Suitable for stainless steel, aluminum, and chrome
- Compatible with machine and hand application
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Polishes (primary) | RTU | 1:0 |
Usage
- Apply about 6 to 8 drops of MetalliCut to a firm foam polishing pad.
- Spread the product over the surface at a low machine speed of about 1 to 2.
- Increase speed to about 4 to 5 and work until abrasives diminish and high gloss appears.
- Remove residue with a clean microfiber towel and repeat the cycle as needed.
- For hand application, spread a small amount onto a microfiber towel or wire wool suited to the metal type.
- Rub with medium to firm pressure until the product becomes clear and gloss is achieved.
핵심 특징
- 다이아몬드 연마 분말
- 점감성 연마 화합물 시스템
- 고광택 마감을 위한 빠른 연마력
- 스테인리스강·알루미늄·크롬 호환
- 기계 및 수작업 모두 사용 가능
사용법
- 단단한 폼 폴리싱 패드에 MetalliCut을 약 6~8방울 도포합니다.
- 기계 속도 약 1~2로 제품을 표면에 고르게 펴줍니다.
- 속도를 약 4~5로 높여 연마제가 점감되고 고광택이 나타날 때까지 작업합니다.
- 깨끗한 마이크로파이버 타올로 잔류물을 제거하고 필요에 따라 반복합니다.
- 수작업 시 금속 종류에 맞는 마이크로파이버 타올 또는 스틸 울에 소량을 묻힙니다.
- 제품이 투명해지고 광택이 나올 때까지 중간에서 강한 압력으로 문지릅니다.
Also known as: 카프로, CARPRO MetalliCut, MetalliCut Metal Polish, Metal Polish
Sources
Related products
More from CarPro
More Polishes products
- SWAG GLASS WATER SPOT REMOVER CREAM+
- ValetPRO Purple Passion
- Meguiar's Marine/RV Polish & Gloss Enhancer
- Meguiar's DA Microfiber Correction Compound
- ProStaff XMAL1 Multi Purpose Polish with Abrasives
- XPEL One Step