HAPPY BUG
해피 버그
HAPPY BUG is a water-based concentrated bug and tar remover formulated with clear-coat-safe surfactants and co-solvents that quickly dissolve bug splatter, tree sap, tar, and heavy road films without harsh scrubbing. Diluted 4:1 to 9:1, it cleans effectively while remaining safe on paint, glass, chrome, and plastic trim.
HAPPY BUG는 클리어코트에 안전한 계면활성제와 공용매를 함유한 수성 농축형 버그·타르 제거제로, 강한 문지름 없이 벌레 흔적·수액·타르·노면 오염물을 신속하게 분해합니다. 4:1~9:1로 희석하여 사용하며 도장·유리·크롬·플라스틱 트림에 안전합니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Remover, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:4~1:9
- pH
- alkali (9)
Key features
- Removes bug splatter, tar, tree sap, and heavy road grime
- Clear-coat-safe surfactants and co-solvents
- High-sudsing formula prevents scratches during cleaning
- Safe on metal, glass, and plastic surfaces
- Concentrated 4:1 to 9:1 dilution range
- Can be added to wash bucket as pre-wash additive
Dilution
- Exterior : Remover — 1:4~1:9 (1:4-9) (primary)
Usage
- For bug removal: spray diluted HAPPY BUG (4:1 to 9:1) directly onto the affected surface and allow it to dwell for 30 seconds.
- Wipe clean with a soft microfiber towel or bug scrubber; apply a second time for stubborn residue.
- For tar removal: dampen a microfiber towel, spray HAPPY BUG onto both the surface and the towel, press firmly for 1 minute, then gently wipe clean.
- Dry the surface with a clean, dry microfiber towel.
핵심 특징
- 벌레 흔적·타르·수액·노면 오염물 제거
- 클리어코트 안전 계면활성제 및 공용매
- 풍부한 거품으로 세정 중 스크래치 방지
- 금속·유리·플라스틱 표면에 안전
- 4:1~9:1 농축 희석 범위
- 워시 버킷에 직접 첨가하여 전처리제로 활용 가능
사용법
- 벌레 제거 시: 희석한 HAPPY BUG(4:1~9:1)를 오염 표면에 직접 분사하고 30초간 놔둡니다.
- 부드러운 마이크로파이버 타월이나 버그 스크러버로 닦아냅니다. 완고한 잔여물은 한 번 더 도포합니다.
- 타르 제거 시: 마이크로파이버 타월을 물로 적신 후 표면과 타월 모두에 HAPPY BUG를 분사하고 1분간 꾹 눌러 놔둔 뒤 부드럽게 닦아냅니다.
- 깨끗하고 건조한 마이크로파이버 타월로 표면을 닦아 마무리합니다.