Insect Remover Gel
인섹트 리무버 젤
Nanolex Insect Remover Gel is a ready-to-use cleaner specially developed to effortlessly remove even stubborn insect remains from vehicle surfaces. Its adhesive gel formula clings to vertical surfaces for longer dwell time, dissolving residues that can otherwise damage paintwork. It is safe for paint, glass and plastic and does not affect existing sealants or wax layers.
나노렉스 인섹트 리무버 젤은 차량 표면의 단단한 벌레 잔해까지 손쉽게 제거하기 위해 개발된 즉시 사용 가능한 클리너입니다. 부착력이 강한 젤 포뮬러는 수직면에서도 흘러내리지 않고 오래 머무르며 도장면에 손상을 줄 수 있는 잔해를 효과적으로 분해합니다. 도장, 유리, 플라스틱에 안전하며 기존 실란트나 왁스층에 영향을 주지 않습니다.
- Brand
- Nanolex
- Categories
- Exterior : Remover, Exterior : Pre-washing (Pretreatment)
- pH
- alkali (11)
Key features
- Effective insect removal: Dissolves even stubborn insect remains quickly and safely.
- Ready-to-use gel formula: No dilution necessary, can be used directly and adheres for longer.
- Gentle on paintwork: Does not attack the paintwork and does not affect existing sealants.
- Safe for all surfaces: Suitable for paintwork, glass and plastic.
- No residue: Leaves a clean, residue-free surface.
- Made in Germany: Developed, tested, and produced in Germany.
- Free of harmful chemicals, safe for all vehicle surfaces.
Usage
- Preparation: Make sure the surface is cool and in the shade.
- Application: Spray Nanolex Insect Remover Gel generously onto the affected areas.
- Dwell: Leave the product on for 1-2 minutes to soften the insect remains. Make sure it does not dry.
- Wipe: Wipe off the residue with a microfiber cloth or a sponge.
- Rinse: Thoroughly rinse the treated areas with clean water.
핵심 특징
- 효과적인 벌레 제거: 단단히 굳은 벌레 잔해도 빠르고 안전하게 분해합니다.
- 즉시 사용 젤 포뮬러: 희석이 필요 없으며 오래 부착되어 작용합니다.
- 도장면에 순함: 도장이나 기존 실란트에 영향을 주지 않습니다.
- 모든 표면에 안전: 도장, 유리, 플라스틱 모두에 사용 가능합니다.
- 잔여물 없음: 깨끗하고 잔여물 없는 표면을 남깁니다.
- 독일 제조: 독일에서 개발, 테스트, 생산되었습니다.
- 유해 화학물질을 함유하지 않아 모든 차량 표면에 안전합니다.
사용법
- 준비: 표면이 차갑고 그늘에 있는지 확인합니다.
- 도포: 작업 부위에 인섹트 리무버 젤을 충분히 분무합니다.
- 작용: 1~2분간 두어 벌레 잔해를 부드럽게 분해시킵니다. 마르지 않도록 주의합니다.
- 닦아내기: 마이크로화이버 타월이나 스펀지로 잔여물을 닦아냅니다.
- 헹굼: 깨끗한 물로 작업 부위를 충분히 헹굽니다.