Rain Drop Gold Gloss
레인 드롭 골드 글로스
소프트99 · soft · 소프트 · Soft99 Rain Drop Gold Gloss · 소프트99 레인 드롭 골드 글로스
Rain Drop Gold Gloss is the premium aerosol coating in the Rain Drop series, formulated with a highly reactive siloxane for exceptional hydrophobicity lasting 7 months on painted surfaces and 3 months on glass. Its self-smoothing formula with Real-Time Gloss technology levels at the molecular level for a streak-free, crystal-clear finish, and the scratch-filling properties also make it suitable for most exterior and interior unpainted plastic parts.
레인 드롭 골드 글로스는 레인 드롭 시리즈의 프리미엄 에어로졸 코팅제로, 고반응성 실록산 기반 포뮬러로 도장면에 7개월, 유리에 3개월의 뛰어난 발수 보호를 제공합니다. 리얼타임 글로스 기술이 적용된 자기 평탄화 포뮬러가 분자 수준에서 레벨링되어 얼룩 없는 맑고 깊은 광택을 만들어 내며, 스크래치 충전 성능 덕분에 대부분의 외·내장 무도장 플라스틱 부품에도 사용할 수 있습니다.
- Brand
- Soft99
- Categories
- Exterior : Coating
- Primary dilution
- RTU
Key features
- 7 months of hydrophobic protection on body, 3 months on glass
- Real-Time Gloss technology for deep, streak-free finish
- Self-smoothing formula levels at molecular level during application
- Scratch-filling properties — also usable on exterior and interior unpainted plastics
- Includes professional-grade application and finishing cloth
Dilution
- Exterior : Coating — RTU (1:0) (primary)
Usage
- Wash the vehicle thoroughly and rinse off all dirt, sand, and shampoo residue.
- Shake well before use; turn the nozzle to ON, spray onto the wet surface (approximately one shot per 50 cm square), then immediately spread and wipe with the included microfiber cloth, wringing the cloth frequently.
- Apply to glass before the body. For grilles, wheels, or dashboards, spray onto the cloth rather than directly onto the surface.
- If streaks remain, rinse the cloth, wring tightly, and wipe again.
- Allow to cure for at least 24 hours; in cold conditions (below 10°C), place the vehicle in sunlight to aid bonding.
핵심 특징
- 차체 7개월, 유리 3개월 발수 보호
- 리얼타임 글로스 기술로 깊고 얼룩 없는 마무리
- 자기 평탄화 포뮬러로 도포 중 분자 수준 레벨링
- 스크래치 충전 성능 — 외·내장 무도장 플라스틱에도 사용 가능
- 전문가용 도포 및 마무리 천 포함
사용법
- 차량을 깨끗이 세차하고 먼지, 모래, 샴푸 잔여물을 모두 헹궈 냅니다.
- 충분히 흔든 후 노즐을 ON으로 돌리고 젖은 표면에 약 50cm 사방당 1회 분사한 다음, 동봉된 마이크로파이버 천으로 즉시 닦아 고르게 펴줍니다. 천은 자주 짜줍니다.
- 유리에 먼저 도포한 후 차체에 적용합니다. 그릴, 휠, 대시보드에는 직접 분사하지 말고 천에 분사한 후 닦아줍니다.
- 얼룩이 남으면 천을 깨끗이 헹궈 꽉 짠 후 다시 닦아냅니다.
- 최소 24시간 경화시킵니다. 저온(10°C 미만) 환경에서는 차량을 햇빛에 두어 코팅 결합을 촉진하십시오.