MEGAMI Headlight Refresh
메가미 헤드라이트 리프레시
소프트99 · soft · 소프트 · Soft99 MEGAMI Headlight Refresh · MHR · 소프트99 메가미 헤드라이트 리프레시
A two-component headlight restoration kit consisting of a cleaner and a coating agent that work together to eliminate yellowing and cloudiness from deteriorated headlight lenses. The abrasive and chemical cleaner removes surface degradation, while the glass-based hard coat with hydrophobic properties protects restored headlights for approximately six months according to in-house testing.
황변과 흐림 현상이 발생한 헤드라이트 렌즈를 복원하는 2액형 세트로, 클리너와 코팅제가 함께 구성됩니다. 연마 성분과 화학 성분이 표면 열화를 제거하며, 발수 기능을 갖춘 유리 기반 하드 코팅으로 자사 테스트 기준 약 6개월간 헤드라이트를 보호합니다.
- Brand
- Soft99
- Categories
- Exterior : Coating
Key features
- Two-component kit: cleaner and coating
- Removes yellowing and fading from headlight lenses
- Glass-based hard coat layer
- Hydrophobic stain-repellent top layer
- Protection lasting approximately 6 months (in-house testing)
Usage
- Wash and dry the headlight surface thoroughly, then remove any existing coatings before starting.
- Wear the included protective gloves throughout the entire process.
- Shake the cleaner well, apply to the black side of the blue sponge, and polish until yellowing and fading disappear.
- Wet the non-woven cloth with water, wring out firmly, wipe the polished area clean, and allow to dry completely; repeat from step 3 if any discolouration remains.
- Saturate the entire white surface of the yellow sponge with coating liquid, then apply one coat in a single direction ensuring no streaks, adding more liquid as needed.
- Do not touch or allow moisture near the coated surface for 24 hours after application.
핵심 특징
- 클리너와 코팅제로 구성된 2액형 세트
- 헤드라이트 렌즈의 황변 및 색바램 제거
- 유리 기반 하드 코팅 레이어
- 발수 오염 방지 상단 레이어
- 자사 테스트 기준 약 6개월간 지속되는 보호 효과
사용법
- 시작 전 헤드라이트 표면을 깨끗이 세차하고 건조한 후, 기존 코팅을 제거합니다.
- 작업 전 과정에서 동봉된 보호 장갑을 착용합니다.
- 클리너를 충분히 흔든 후 파란 스펀지의 검은 면에 적당량을 도포하고, 황변과 색바램이 사라질 때까지 연마합니다.
- 부직포를 물로 적셔 단단히 짠 뒤 연마한 부위를 닦아내고 완전히 건조합니다. 변색이 남아 있으면 3단계부터 반복합니다.
- 노란 스펀지의 흰 면 전체에 코팅액을 충분히 적셔 한 방향으로 얼룩 없이 한 번에 도포하며, 필요에 따라 추가로 액을 보충합니다.
- 도포 후 24시간 동안 코팅 면을 만지거나 물이 닿지 않도록 합니다.