Relock
릴락
Relock is an entry-level polysilazane-based express ceramic coating that forms a hard, sacrificial barrier on paint, glass, and chrome with up to 12 months of protection. It is ideal for both new ceramic coating applications and annual maintenance top-coats on previously coated vehicles.
릴락은 폴리실라잔 기반의 입문용 속성 세라믹 코팅으로, 도장면, 유리, 크롬 위에 단단한 희생층을 형성하며 최대 12개월의 보호 성능을 제공합니다. 신규 세라믹 코팅 시공과 기존 코팅 차량의 연간 유지보수 탑코트 모두에 적합합니다.
- Brand
- Shine Supply
- Categories
- Exterior : Coating
Key features
- Polysilazane-based true nano-ceramic protection
- Up to 12 months durability
- Hardness greater than 9H
- pH resistance 2 to 13
- Contact angle 108 degrees
- Works on paint, glass, chrome, and black trim
- Easy application without paint correction
- Ideal for annual maintenance on existing ceramic coatings
Usage
- Ensure the surface is clean, dry, and clayed for proper bonding.
- Shake the bottle well, then apply Relock to a microfiber applicator pad.
- Wipe the product onto the surface using overlapping passes.
- Allow the product to set up for 5 to 10 minutes indoors or approximately 5 minutes in direct sunlight; watch for the oil-slick rainbow effect as it dries.
- Perform a swipe test: if the product wipes clear, it is ready for removal.
- Remove with a clean microfiber towel, then wipe over the area again with a second towel to ensure an even, streak-free finish.
- Wait at least 1 hour between coats if applying additional layers, and allow 8 hours for full cure while avoiding water contact.
핵심 특징
- 폴리실라잔 기반 진정한 나노 세라믹 보호
- 최대 12개월 내구성
- 9H 초과 경도
- pH 2~13 내성
- 접촉각 108도
- 도장면, 유리, 크롬, 블랙 트림에 적용 가능
- 도장 보정 없이 간편 시공
- 기존 세라믹 코팅 연간 유지보수에 적합
사용법
- 표면을 깨끗하게 세척하고 건조시킨 후, 올바른 접착을 위해 클레이 작업을 완료하세요.
- 병을 충분히 흔든 후 마이크로파이버 어플리케이터 패드에 Relock을 도포합니다.
- 겹치는 방식으로 표면 전체에 고르게 펴 바릅니다.
- 실내에서 5~10분, 직사광선 아래에서는 약 5분 건조시킵니다. 기름막 무지개 효과가 나타나는 것을 확인하세요.
- 손가락으로 닦아보는 테스트를 합니다. 깨끗하게 닦이면 제거할 준비가 된 것입니다.
- 깨끗한 마이크로파이버 타월로 제거하고, 두 번째 타월로 다시 닦아 얼룩 없이 균일하게 마감합니다.
- 추가 레이어 시공 시 코트 사이 최소 1시간을 대기하고, 완전 경화까지 8시간 동안 물 접촉을 피하세요.