Shine Supply Punch-It Dilution Ratios & User Guide

펀치잇
Shine Supply Punch-It — Exterior : Quick Detailer, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/shine-supply/punch-it
Shine Supply 펀치잇 — Exterior : Quick Detailer, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/shine-supply/punch-it
A silica-loaded ceramic detail spray that leaves a hydrophobic, slick, self-cleaning finish on exterior surfaces. Built with SiO2 and synthetic polymers, it adds protection on bare paint and ceramic-coated vehicles and can serve as a drying aid or final wipe-down spray.
SiO2가 함유된 세라믹 디테일 스프레이로, 차량 외부 표면에 발수성이 높고 매끄럽고 자기 세정 되는 마감을 남깁니다. SiO2와 합성 폴리머로 만들어져 도장면과 세라믹 코팅 차량의 보호를 더해 주며, 건조 보조제나 마무리 와이핑 스프레이로도 쓸 수 있습니다.
- Brand
- Shine Supply
- Categories
- Exterior : Quick Detailer, Exterior : Drying Aid
- Primary dilution
- RTU
- pH
- neutral (7)
- Last updated
- 2026-06-02
Key features
- SiO2 ceramic formula
- Hydrophobic, self-cleaning finish
- Works on all exterior surfaces including ceramic coatings
- Use as final wipe, drying aid, or spray-on rinse-off
- Reduces towel drag during drying
- Boosts slickness on ceramic-coated vehicles without full recoat
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Quick Detailer (primary) | RTU | 1:0 |
Usage
- Always start with a freshly washed vehicle.
- Final wipe method: wash and dry the vehicle, spray 1-2 sprays onto a clean microfiber towel, wipe one panel at a time, then buff streak-free.
- Drying aid method: after rinsing, leave the vehicle wet, lightly mist one wet panel at a time, then dry immediately with a drying towel.
- Spray-on rinse-off method: after washing, spray onto a wet panel, allow 5-10 seconds of dwell time, then rinse completely before the next panel.
핵심 특징
- SiO2 세라믹 성분
- 발수성과 자기 세정 표면 형성
- 세라믹 코팅 포함 모든 외부 표면에 사용
- 마무리 와이핑, 건조 보조, 분사 후 헹굼 방식 활용
- 건조 시 타월 마찰 감소
- 전면 재코팅 없이 세라믹 차량의 발수성 보강
사용법
- 항상 방금 세차한 차량에 사용합니다.
- 마무리 와이핑: 세차 후 건조한 차량에 깨끗한 타월로 1~2회 분사하고 패널별로 닦은 뒤 얼룩 없이 버핑합니다.
- 건조 보조: 헹군 뒤 젖은 상태에서 한 패널씩 가볍게 분사하고 마이크로파이버 건조 타월로 바로 닦아냅니다.
- 분사 후 헹굼: 세차 후 젖은 패널에 분사하고 5~10초 둔 뒤 완전히 헹궈 다음 패널로 이동합니다.
Also known as: 샤인 서플라이, Shine Supply Punch-It, SS Punch-It, Punch It, 샤인 서플라이 펀치잇
Sources
Related products
More from Shine Supply
- Beadlock Black
- Black Microfiber Trim & Tire Dressing Applicator
- Burn Out
- Sun Shine
- Clean N Shine
- Dual Head Foam Swabs
More Quick Detailer products
- NANOSKIN BANANA ICE
- McKee's 37 Ceramic Detail Spray
- servFaces Fast Shine 3 in ONE
- POLYTOP Velox Care
- Adam's Polishes Graphene Detail Spray
- Shine group Exterior Trim & Plastic Restorer