Shine Supply 펀치잇 희석비 & 사용 가이드

Shine Supply 펀치잇 희석비 pH 스펙 카드

Punch-It

SiO2가 함유된 세라믹 디테일 스프레이로, 차량 외부 표면에 발수성이 높고 매끄럽고 자기 세정 되는 마감을 남깁니다. SiO2와 합성 폴리머로 만들어져 도장면과 세라믹 코팅 차량의 보호를 더해 주며, 건조 보조제나 마무리 와이핑 스프레이로도 쓸 수 있습니다.

브랜드
Shine Supply
카테고리
Exterior : Quick Detailer, Exterior : Drying Aid
기본 희석 비율
RTU
pH
neutral (7)
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Quick Detailer (기본)RTU1:0

사용법

  1. 항상 방금 세차한 차량에 사용합니다.
  2. 마무리 와이핑: 세차 후 건조한 차량에 깨끗한 타월로 1~2회 분사하고 패널별로 닦은 뒤 얼룩 없이 버핑합니다.
  3. 건조 보조: 헹군 뒤 젖은 상태에서 한 패널씩 가볍게 분사하고 마이크로파이버 건조 타월로 바로 닦아냅니다.
  4. 분사 후 헹굼: 세차 후 젖은 패널에 분사하고 5~10초 둔 뒤 완전히 헹궈 다음 패널로 이동합니다.

A silica-loaded ceramic detail spray that leaves a hydrophobic, slick, self-cleaning finish on exterior surfaces. Built with SiO2 and synthetic polymers, it adds protection on bare paint and ceramic-coated vehicles and can serve as a drying aid or final wipe-down spray.

Key features

  • SiO2 ceramic formula
  • Hydrophobic, self-cleaning finish
  • Works on all exterior surfaces including ceramic coatings
  • Use as final wipe, drying aid, or spray-on rinse-off
  • Reduces towel drag during drying
  • Boosts slickness on ceramic-coated vehicles without full recoat

Usage

  1. Always start with a freshly washed vehicle.
  2. Final wipe method: wash and dry the vehicle, spray 1-2 sprays onto a clean microfiber towel, wipe one panel at a time, then buff streak-free.
  3. Drying aid method: after rinsing, leave the vehicle wet, lightly mist one wet panel at a time, then dry immediately with a drying towel.
  4. Spray-on rinse-off method: after washing, spray onto a wet panel, allow 5-10 seconds of dwell time, then rinse completely before the next panel.

다른 이름: 샤인 서플라이, Shine Supply Punch-It, SS Punch-It, Punch It, 샤인 서플라이 펀치잇

View in English

출처

관련 제품

Shine Supply의 다른 제품

같은 카테고리(Quick Detailer) 제품

더 보기