Shine Supply Hole Shot Prep Wash Dilution Ratios & User Guide

Shine Supply Hole Shot Prep Wash dilution ratio and pH specification chart

홀 샷 프렙 워시

Shine Supply Hole Shot Prep Wash — Exterior : Pre-washing (Pretreatment), alkali pH, base dilution 1:2. At 1:2, mix about 500 ml of Shine Supply Hole Shot Prep Wash per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/shine-supply/hole-shot-prep-wash

Shine Supply 홀 샷 프렙 워시 — Exterior : Pre-washing (Pretreatment), pH alkali, 기본 희석 1:2. 1:2 기준 물 1L당 Shine Supply 홀 샷 프렙 워시 약 500ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/shine-supply/hole-shot-prep-wash

A non-caustic pre-wash made to break down heavy grime, mud, and road film on badly soiled vehicles before contact washing. Applied through a foam cannon and rinsed off, it clears most of the loose contamination so the wash mitt does not drag debris across the paint. The built-in rinse aid sheets off cleanly with no residue and readies the surface for a soap wash.

컨택트 세차 전 심하게 오염된 차량의 무거운 오염, 진흙, 도로 오염물을 분해하기 위한 비부식성 전처리 세차제입니다. 폼 캐논으로 도포한 뒤 헹궈내면 느슨한 오염물 대부분이 제거되어, 세차 패드가 도장면에 이물질을 끌고 다니지 않게 됩니다. 내장된 헹굼 보조 성분이 잔여물 없이 깔끔하게 씻겨 샴푸 세차를 준비해 줍니다.

Brand
Shine Supply
Categories
Exterior : Pre-washing (Pretreatment)
Primary dilution
1:2
pH
alkali (12)
Last updated
2026-05-29

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:21:2

Usage

  1. Dilute 1:2 (product to water) in a foam cannon.
  2. Rinse the vehicle thoroughly to clear loose debris.
  3. Apply the diluted product evenly across the whole vehicle.
  4. Let it dwell 1-2 minutes to break down contamination, and do not let it dry.
  5. Rinse thoroughly from top to bottom.
  6. Follow with a standard contact wash using the right Shine Supply soap.

핵심 특징

  • 도장, 플라스틱, 고무, 금속, 알루미늄에 안전한 비부식성 제형
  • 무거운 오염, 진흙, 도로 오염물 분해
  • 컨택트 세차 전 무접촉 전처리로 스월 위험 감소
  • 내장 헹굼 보조 성분으로 잔여물 없는 헹굼
  • 폼 캐논용 1:2 희석
  • 샤인 서플라이 세차 샴푸와 함께 사용

사용법

  1. 폼 캐논에 제품 1, 물 2 비율로 희석합니다.
  2. 차량을 충분히 헹궈 느슨한 이물질을 제거합니다.
  3. 희석한 제품을 차량 전체에 고르게 도포합니다.
  4. 오염물이 분해되도록 1~2분 두되 마르지 않게 합니다.
  5. 위에서 아래로 충분히 헹굽니다.
  6. 적합한 샤인 서플라이 샴푸로 일반 컨택트 세차를 이어서 진행합니다.

Also known as: 샤인 서플라이, Shine Supply Hole Shot Prep Wash, Shine Hole Shot Prep Wash, SS Hole Shot Prep Wash, HSPW, Shine Supply HSPW, Shine HSPW, SS HSPW, 샤인 서플라이 홀 샷 프렙 워시, 샤인 서플라이 HSPW

한국어로 보기

Sources

Related products

More from Shine Supply

More Pre-washing (Pretreatment) products

Explore more