servFaces Yacht Paint Coating Dilution Ratios & User Guide

servFaces Yacht Paint Coating dilution ratio and pH specification chart

요트 페인트 코팅

servFaces Yacht Paint Coating — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/servfaces/yacht-paint-coating

servFaces 요트 페인트 코팅 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/servfaces/yacht-paint-coating

Yacht Paint Coating is a transparent, highly resistant protective coating for painted surfaces on watercraft. It builds a long-lasting, scratch- and dirt-resistant layer that shields against acids, salt water, weathering, and mechanical damage, is heat-resistant up to 1800C, and gives an easy-to-clean finish using little product.

요트 페인트 코팅은 선박의 도장 표면을 위한 투명하고 내구성 높은 보호 코팅입니다. 산, 염수, 풍화, 기계적 손상으로부터 표면을 지키는 오래가는 보호막을 만들고, 최고 1800C까지 내열성을 갖추며, 소량으로 손쉽게 세척되는 마감면을 제공합니다.

Brand
servFaces
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Make sure the surface is clean, dry, and grease-free: degrease with 99% n-butyl acetate and neutralize with servFaces Surface Cleaner Neutra.
  2. Apply with an applicator on smooth surfaces, or spray/roll onto rough, porous substrates.
  3. After about 1-2 minutes, wipe away excess with a microfiber cloth.
  4. Protect the treated surface from dirt and moisture for at least 18 hours after application.
  5. Let it cure at ambient temperature for about 6-8 days; apply multiple coats on gelcoat for lasting protection.

핵심 특징

  • 산, 염수, 풍화, 기계적 충격에 내성
  • 최고 +1800C 내열성
  • 스크래치와 오염에 강한 코팅막
  • 열탄성 특성에 따른 자가 회복 효과
  • 소량으로 구현되는 투명 마감
  • 기재 표면 경도 향상
  • 요트 및 선박의 도장 표면용

사용법

  1. 표면이 깨끗하고 건조하며 기름기가 없는지 확인합니다: 99% n-부틸 아세테이트로 탈지 후 servFaces Surface Cleaner Neutra로 중화합니다.
  2. 매끄러운 표면에는 어플리케이터로 도포하고, 거칠거나 다공성 기재에는 스프레이 또는 롤러로 적용합니다.
  3. 약 1-2분 후 마이크로파이버 천으로 잉여 제품을 닦아냅니다.
  4. 시공 후 최소 18시간 동안 오염과 수분으로부터 표면을 보호합니다.
  5. 상온에서 약 6-8일간 경화시키며, 오래가는 보호를 위해 젤코트에는 다층 도포합니다.

Also known as: serv, 서브페이스, 서브, servFaces Yacht Paint Coating, SF Yacht Paint Coating, YPC, servFaces YPC, SF YPC, 서브페이시스 요트 페인트 코팅, 서브페이시스 YPC, SF10045.2

한국어로 보기

Sources

Related products

More from servFaces

More Coating products

Explore more