servFaces Yacht Metal Coating Dilution Ratios & User Guide

servFaces Yacht Metal Coating dilution ratio and pH specification chart

요트 메탈 코팅

servFaces Yacht Metal Coating — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/servfaces/yacht-metal-coating

servFaces 요트 메탈 코팅 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/servfaces/yacht-metal-coating

Yacht Metal Coating is a transparent, highly resistant surface coating for metal and other surfaces on watercraft. Once cured it forms a durable layer that resists acids, salt water, weathering, resins, and mechanical stress, is heat-resistant up to 1800C, and gives an easy-to-clean, scratch- and dirt-resistant finish.

요트 메탈 코팅은 선박의 금속 및 여러 표면을 위한 투명하고 내구성 높은 표면 코팅입니다. 경화 후에는 산, 염수, 풍화, 수지, 기계적 충격에 저항하는 보호막을 형성하며, 최고 1800C까지 내열성을 갖추고 오염에 강하며 손쉽게 세척되는 마감면을 제공합니다.

Brand
servFaces
Categories
Exterior : Coating
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Make sure the surface is clean, dry, and grease-free: use 99% n-butyl acetate, then neutralize with servFaces Surface Cleaner Neutra.
  2. Apply with an applicator on smooth surfaces, or spray/roll onto rough, absorptive substrates.
  3. After about 1-2 minutes reaction time, remove excess with a microfiber cloth.
  4. Protect the treated surface from dirt and moisture for at least 18 hours after application.
  5. Let it cure at ambient temperature for about 6-8 days; apply 2-3 layers on gelcoat for lasting protection.

핵심 특징

  • 산, 염수, 풍화, 기계적 충격에 내성
  • 최고 +1800C 내열성
  • 스크래치와 오염에 강한 보호막
  • 열탄성 배합으로 자가 회복 특성
  • 소량으로 형성되는 투명하고 오래가는 코팅
  • 표면 경도 향상
  • 다양한 선박 표면에 적용 가능

사용법

  1. 표면이 깨끗하고 건조하며 기름기가 없는지 확인합니다: 99% n-부틸 아세테이트를 쓴 뒤 servFaces Surface Cleaner Neutra로 중화합니다.
  2. 매끄러운 표면에는 어플리케이터로 도포하고, 거칠거나 흡수성 있는 기재에는 스프레이 또는 롤러로 적용합니다.
  3. 약 1-2분 반응 후 마이크로파이버 천으로 잉여 제품을 제거합니다.
  4. 시공 후 최소 18시간 동안 오염과 수분으로부터 표면을 보호합니다.
  5. 상온에서 약 6-8일간 경화시키며, 젤코트 표면에는 오래가는 보호를 위해 2-3회 중첩 도포합니다.

Also known as: serv, 서브페이스, 서브, servFaces Yacht Metal Coating, SF Yacht Metal Coating, YMC, servFaces YMC, SF YMC, 서브페이시스 요트 메탈 코팅, 서브페이시스 YMC, SF10046.2

한국어로 보기

Sources

Related products

More from servFaces

More Coating products

Explore more