Finish Polish
피니시 폴리시
serv · 서브페이스 · 서브 · servFaces Finish Polish · SF Finish Polish · FP · servFaces FP · SF FP · 서브페이시스 피니시 폴리시 · 서브페이시스 FP · SF10062
A silicone-free polish made for professional work on dull coated surfaces and paint with minor scratches. Its high-performance abrasive particles suit scratch-resistant clear coats and clear away surface scratches from tunnel car-wash systems and similar wear, leaving a hologram-free high gloss. It reliably removes P2500 sanding marks and striae.
흐려진 코팅면과 미세 흠집이 있는 도장면을 전문적으로 다루기 위한 실리콘 프리 폴리시입니다. 고성능 연마 입자가 내스크래치 클리어 코트에 알맞고 터널 세차 등으로 생긴 표면 흠집을 없애 홀로그램 없는 고광택을 냅니다. P2500 사포 자국과 줄무늬도 안정적으로 제거합니다.
- Brand
- servFaces
- Categories
- Exterior : Polishes
Key features
- Silicone-free formula
- High-performance abrasive particles
- Suited to scratch-resistant clear coats
- Removes P2500 sanding marks and striae
- Hologram-free high gloss
- Removes scratches from tunnel car-wash systems
Usage
- Apply Finish Polish to the surface to be treated and spread with a polishing pad (V2 or V3 recommended) or polishing pelt.
- Polish crosswise at a maximum of 2,000 rpm, starting at higher pressure and lower speed (approx. 800 rpm).
- As the process progresses, reduce pressure and increase speed (approx. 1,500 rpm) to achieve a high-polish finish.
- Remove remaining polish residues with a microfiber cloth.
- If any veils or marks appear after polishing, remove them with Ultra Fine Polish.
핵심 특징
- 실리콘 프리 포뮬러
- 고성능 연마 입자
- 내스크래치 클리어 코트에 적합
- P2500 사포 자국 및 줄무늬 제거
- 홀로그램 없는 고광택
- 터널 세차로 인한 흠집 제거
사용법
- 피니시 폴리시를 처리할 표면에 도포하고 폴리싱 패드(V2 또는 V3 권장) 또는 폴리싱 펠트로 펴 바릅니다.
- 최대 2,000 rpm으로 교차 방향으로 폴리싱하되, 초반에는 높은 압력과 낮은 속도(약 800 rpm)로 작업합니다.
- 작업이 진행될수록 압력을 줄이고 속도를 높여(약 1,500 rpm) 고광택 마무리를 냅니다.
- 남은 폴리시 잔여물은 마이크로파이버 천으로 제거합니다.
- 폴리싱 후 희뿌옇거나 자국이 남으면 울트라 파인 폴리시로 제거합니다.