Aero Window Coating
에어로 윈도우 코팅
serv · 서브페이스 · 서브 · servFaces Aero Window Coating · SF Aero Window Coating · AWC · servFaces AWC · SF AWC · 서브페이시스 에어로 윈도우 코팅 · 서브페이시스 AWC · SF10050
Aero Window Coating is a clear, hard-wearing coating formulated for aircraft glazing and windows. Once cured it delivers long-term water repellency and scratch resistance, plus protection against acids, salt water, and heat up to 1,090°C.
에어로 윈도우 코팅은 항공기 유리와 창에 맞춰 만든 투명하고 내구성 있는 코팅입니다. 경화 후에는 오래가는 발수성과 긁힘 저항을 주며 산성, 염수, 최대 1,090°C의 열로부터 보호합니다.
- Brand
- servFaces
- Categories
- Exterior : Glass Sealant
Key features
- For aircraft windows and glazing
- Heat resistant up to 1,090°C
- Long-lasting water repellency after curing
- Scratch- and dirt-resistant layer
- Resists acids, salt water, weathering
- Self-healing thermoelastic film
- Clear finish
Usage
- Clean the surface fully and remove all grease before applying.
- Apply with an applicator on smooth surfaces, or spray or roll onto rough, absorptive substrates.
- After about 1 to 2 minutes of reaction, wipe or polish off any excess with a microfiber cloth.
- Keep the treated surface away from dirt and moisture for at least 18 to 24 hours.
- Allow roughly 6 to 8 days for full cure, varying with temperature and humidity (30 to 80% RH, 10 to 35°C).
핵심 특징
- 항공기 유리 및 창용
- 최대 1,090°C 내열
- 경화 후 오래가는 발수성
- 긁힘 및 오염 저항막
- 산성, 염수, 풍화 저항
- 자가복원 열탄성 피막
- 투명 마감
사용법
- 도포 전 표면을 깨끗이 세정하고 유분을 모두 제거합니다.
- 매끈한 표면에는 어플리케이터로 바르고, 거칠고 흡수성 있는 표면에는 분사하거나 롤러로 바릅니다.
- 약 1~2분 반응 후 마이크로파이버 천으로 잔여물을 닦거나 폴리싱합니다.
- 도포 후 최소 18~24시간 동안 오염과 수분을 피해 표면을 보호합니다.
- 완전 경화는 온도와 습도(30~80% RH, 10~35°C)에 따라 약 6~8일 정도 소요됩니다.