SEAL
씰
퀴버 · QUIVR SEAL · 퀴버 씰
QUIVR SEAL is a water-based silica sealant that bonds to paint, trim, chrome, plastics, and glass to deliver a slick, hydrophobic finish on both interior and exterior surfaces. Leveraging the same silica chemistry found in glass and ceramics, it reinforces surfaces with protection lasting up to six months as a standalone product or as a booster on top of an existing ceramic coating. Its versatile formula works on painted panels, bed liners, powder-coated wheels, marine vehicles, and interior plastics alike.
QUIVR SEAL은 수성 실리카 실란트로, 페인트, 트림, 크롬, 플라스틱, 유리 등 차량 내외부의 다양한 표면에 결합하여 매끄럽고 발수성 높은 마감을 제공합니다. 유리와 세라믹에 사용되는 실리카 성분을 활용해 최대 6개월간 지속되는 보호력을 단독으로 또는 기존 세라믹 코팅 위에 덧씌워 강화하는 방식으로 사용할 수 있습니다. 도장면, 베드 라이너, 파우더 코팅 휠, 선박, 실내 플라스틱 등 폭넓은 표면에 적용 가능합니다.
- Brand
- QUIVR
- Categories
- Exterior : Coating, Exterior : Glass Sealant, Interior : Trim Sealants
- Primary dilution
- RTU ~ 1:3
Key features
- Water-based silica formula
- Protects paint, trim, chrome, plastics, and glass
- Up to 6 months of standalone protection
- Boosts and maintains existing ceramic coatings
- Revives faded bed liners and trim
- Hydrophobic slick surface finish
- Safe for interior and exterior use
Dilution
- Exterior : Coating — RTU ~ 1:3 (1:0-3) (primary)
Usage
- For paint and glass, spray directly onto the surface or onto a microfiber towel, then spread evenly across the treated area.
- Apply out of direct sunlight and onto cool paint for best results.
- Allow a brief dwell time for the product to bond to the surface before buffing off with a clean microfiber towel.
- For plastics, trim, powder-coated surfaces, and bed liners, spray directly onto the surface and allow to penetrate for 3 to 5 minutes.
- Buff off any excess with a microfiber towel to achieve a streak-free finish.
핵심 특징
- 수성 실리카 포뮬러
- 페인트, 트림, 크롬, 플라스틱, 유리 보호
- 단독 사용 시 최대 6개월 지속
- 기존 세라믹 코팅 성능 강화 및 유지
- 색 바랜 베드 라이너 및 트림 복원
- 발수성 높은 매끄러운 표면 마감
- 내외부 표면 모두 사용 가능
사용법
- 페인트와 유리에는 표면에 직접 스프레이하거나 마이크로파이버 타월에 묻혀 고르게 펴 바릅니다.
- 직사광선을 피하고 도장면이 충분히 식은 상태에서 시공하면 더 나은 결과를 얻을 수 있습니다.
- 제품이 표면에 결합될 수 있도록 잠시 두었다가 깨끗한 마이크로파이버 타월로 닦아냅니다.
- 플라스틱, 트림, 파우더 코팅 표면, 베드 라이너에는 직접 스프레이한 후 3~5분간 침투시킵니다.
- 마이크로파이버 타월로 잔여물을 닦아내어 얼룩 없는 마감을 완성합니다.