QUIVR Abyss Tire Dressing Dilution Ratios & User Guide

QUIVR Abyss Tire Dressing dilution ratio and pH specification chart

어비스 타이어 드레싱

QUIVR Abyss Tire Dressing — Exterior : Tire&Wheel Sealant, base dilution RTU ~ 1:2. At 1:10, mix about 100 ml of QUIVR Abyss Tire Dressing per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/quivr/abyss-tire-dressing

QUIVR 어비스 타이어 드레싱 — Exterior : Tire&Wheel Sealant, 기본 희석 RTU ~ 1:2. 1:10 기준 물 1L당 QUIVR 어비스 타이어 드레싱 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/quivr/abyss-tire-dressing

Abyss Tire Dressing is a versatile dressing that delivers a deep, rich satin finish on tires without the greasy or over-glossed look. It can be applied straight from the bottle for maximum depth on tires, or diluted for a more subtle effect on rubber and interior plastics. The no-sling formula is safe on most rubber and plastic surfaces and provides a clean OEM-like appearance when diluted for trim.

어비스 타이어 드레싱은 기름진 광택 없이 타이어에 깊고 풍부한 새틴 마감을 구현하는 다목적 드레싱입니다. 타이어에는 원액 그대로 사용해 최대 깊이감을 내거나, 희석하여 고무 및 실내 플라스틱 트림에 자연스러운 OEM 느낌을 줄 수 있습니다. 비산 없는 제형으로 대부분의 고무 및 플라스틱 소재에 안전하게 사용 가능합니다.

Brand
QUIVR
Categories
Exterior : Tire&Wheel Sealant, Interior : Trim Sealants
Primary dilution
RTU ~ 1:2
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-09

Key features

Dilution

UseDilutionRatio
Exterior : Tire&Wheel Sealant (primary)RTU ~ 1:21:0-2
Interior : Trim Sealants1:101:10

Usage

  1. For tires, apply straight from the bottle for maximum depth and bold satin finish, or dilute 1:2 for a more subtle appearance.
  2. For interior plastics and trim, dilute up to 1:10 to restore a clean OEM look without unwanted shine.
  3. Allow 5-10 minutes of dry time after application; do not use on rubber or plastic floor mats.

핵심 특징

  • 기름진 느낌 없는 깊고 풍부한 새틴 마감
  • 타이어, 트림, 실내 플라스틱에 맞게 희석 비율 조절 가능
  • 짧은 건조 시간 후 비산 없는 제형
  • 대부분의 고무 및 플라스틱 소재에 안전
  • 희석 사용 시 실내 트림의 자연스러운 OEM 외관 복원

사용법

  1. 타이어에는 원액 그대로 사용하여 최대 깊이감을 내거나, 1:2로 희석하여 은은한 마감을 표현하세요.
  2. 실내 플라스틱 및 트림에는 최대 1:10으로 희석하여 과도한 광택 없이 깔끔한 OEM 느낌을 복원하세요.
  3. 도포 후 5~10분간 건조 시간을 두세요. 고무 또는 플라스틱 바닥 매트에는 사용하지 마세요.

Also known as: 퀴버, QUIVR Abyss Tire Dressing, Abyss, QUIVR Abyss, ATD, QUIVR ATD, 퀴버 어비스 타이어 드레싱

한국어로 보기

Sources

Related products

More from QUIVR

More Tire&Wheel Sealant products

Explore more