QUIVR Impact Foam Dilution Ratios & User Guide

QUIVR Impact Foam dilution ratio and pH specification chart

임팩트 폼

QUIVR Impact Foam — Exterior : Foam, neutral pH, base dilution 1:10. At 1:10, mix about 100 ml of QUIVR Impact Foam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/quivr/impact-foam

QUIVR 임팩트 폼 — Exterior : Foam, pH neutral, 기본 희석 1:10. 1:10 기준 물 1L당 QUIVR 임팩트 폼 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/quivr/impact-foam

QUIVR Impact Foam is a high-performance automotive detergent concentrate formulated for professional detailers that produces thick, clingy foam to encapsulate and lift dirt, grime, and road contaminants during a pre-wash stage. It is safe for all exterior surfaces and helps minimize swirl marks and scratches by reducing direct contact with soiling during washing. The concentrate supports multiple dilution ratios depending on whether it is used in a foam cannon pre-wash, a foamer for wheels and tires, or a contact wash bucket.

QUIVR Impact Foam은 전문 디테일러를 위해 설계된 고성능 자동차용 세제 농축액으로, 세차 전처리 단계에서 표면에 두껍게 달라붙는 풍부한 거품을 만들어 먼지, 이물질, 도로 오염물을 효과적으로 제거합니다. 모든 외부 표면에 안전하게 사용할 수 있으며, 세차 중 오염물과의 직접 마찰을 줄여 미세 스크래치와 소용돌이 흠집 발생을 최소화합니다. 폼 캐논 전처리, 휠 및 타이어 전용 포머, 버킷 세차 등 다양한 용도에 맞게 희석하여 사용할 수 있습니다.

Brand
QUIVR
Categories
Exterior : Foam, Exterior : Tire&Wheel Cleaner, Exterior : Bucket Car Shampoo
Primary dilution
1:10
pH
neutral (8)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-18

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:101:10
Exterior : Tire&Wheel Cleaner1:51:5
Exterior : Bucket Car Shampoo1:213~1:3201:213-320

Usage

  1. For a foam cannon pre-wash, dilute 1:10 and apply a thick, clinging layer over the entire vehicle.
  2. For cleaning wheels and tires, dilute 1:5 in a pump foamer/sprayer and apply.
  3. For a contact bucket wash, mix 2-3 oz of Impact Foam per 5 gallons of water.
  4. Allow the foam to dwell briefly to break down dirt and road grime, then agitate as needed.
  5. Rinse thoroughly with water.

핵심 특징

  • 강력한 폼이 표면에 밀착하여 전처리 효과 극대화
  • 먼지, 이물질, 도로 오염물 분해
  • 모든 외부 표면에 안전
  • 미세 스크래치 및 소용돌이 흠집 발생 최소화
  • 용도별 다양한 희석 비율 적용 가능

사용법

  1. 폼캐논 프리워시 시에는 1:10으로 희석하여 차량 전체에 두껍게 밀착되도록 도포합니다.
  2. 휠과 타이어 세척 시에는 펌프 포머/분무기에 1:5로 희석하여 도포합니다.
  3. 버킷 접촉 세차 시에는 물 5갤런당 임팩트 폼 2~3oz를 혼합합니다.
  4. 거품이 오염물과 도로 때를 분해하도록 잠시 두었다가 필요에 따라 문질러 줍니다.
  5. 물로 깨끗이 헹굽니다.

Also known as: 퀴버, QUIVR Impact Foam, IF, QUIVR IF, 퀴버 임팩트 폼, 퀴버 IF

한국어로 보기

Sources

Related products

More from QUIVR

More Foam products

Explore more