POLYTOP NEOX Glaze Ultra Dilution Ratios & User Guide

POLYTOP NEOX Glaze Ultra dilution ratio and pH specification chart

네옥스 글레이즈 울트라

POLYTOP NEOX Glaze Ultra — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/polytop/neox-glaze-ultra

POLYTOP 네옥스 글레이즈 울트라 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/polytop/neox-glaze-ultra

An extremely durable ceramic coating that permanently protects nearly any surface or component. Its polysilazanes form a 3D matrix bonding to paint, plastics, and paint-protection or wrap films, sealing microscopic imperfections into a hard, dirt-repellent shield and boosting gloss, depth, smoothness, and hydrophobic beading, while a fast cure time paired with UV-active residue makes removal control easy under a blacklight.

거의 모든 표면과 부품을 영구적으로 보호하는 매우 내구성이 뛰어난 세라믹 코팅제이다. 함유된 폴리실라잔이 3D 매트릭스를 형성해 도장, 플라스틱, PPF 및 랩핑 필름에 결합하며, 미세한 표면 요철을 메워 단단하고 오염 방지 효과가 뛰어난 보호막을 만든다. 광택과 색감, 매끄러움, 발수 효과를 강화하며 짧은 건조 시간과 UV 반응 성분 덕분에 블랙라이트로 제거 상태를 쉽게 확인할 수 있다.

Brand
POLYTOP
Categories
Exterior : Coating
Primary dilution
RTU
Last updated
2026-07-19

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Prep gloss paint with clay/prep pad and lubricant, then polish with an anti-hologram polish as the final step before coating.
  2. Degrease with NEOX Prep or POLYTOP Wipe-Down Spray, spraying section by section, letting it dwell 30-60 seconds, then wiping with a premium microfiber cloth.
  3. For matte paint, film, plastic, or rubber, hand-wash thoroughly first since these surfaces cannot be polished or clayed.
  4. Wrap a NEOX Rags cloth around the NEOX Applicator, dispensing 20-30 drops on first use and 10-15 drops on top-ups, replacing the cloth after about 3-4 panels or when visibly soiled.
  5. Apply NEOX Glaze Ultra in overlapping crossing passes so the surface is fully wetted, treating large panels in sections.
  6. After 4-10 minutes of reaction time, remove with two premium microfiber cloths without pressure, checking residue with a UV lamp.
  7. Let it cure at room temperature for 24 hours away from rain, weather, or sun, and avoid washing or heavy friction for 10-14 days while it fully hardens.

핵심 특징

  • 유리를 제외한 모든 표면에 사용 가능
  • 블랙라이트로 제거 상태 확인 가능
  • 약 35,000~50,000km 지속력
  • 반응성 표면 결합
  • 다층 코팅 가능
  • 오염 방지
  • 이지온 이지오프
  • 강한 물방울 발수 효과
  • 젖은 듯한 광택 마감

사용법

  1. 유광 도장은 점토바 또는 프렙 패드와 윤활제로 예비 작업한 뒤 안티홀로그램 폴리시로 마무리 폴리싱한다.
  2. 네옥스 프렙이나 폴리탑 와이프 다운 스프레이로 구역별로 분사하여 30~60초 방치 후 프리미엄 마이크로파이버 타월로 닦아 탈지한다.
  3. 무광 도장, 필름, 플라스틱, 고무는 폴리싱이나 점토 작업이 불가하므로 손세차로 충분히 세척한다.
  4. 네옥스 랙스 타월을 네옥스 애플리케이터에 감싸고 처음 사용 시 20~30방울, 재도포 시 10~15방울을 사용하며, 3~4개 패널마다 또는 오염 시 타월을 교체한다.
  5. 표면이 완전히 젖도록 겹쳐가며 십자 형태로 도포하고 넓은 패널은 구역을 나누어 작업한다.
  6. 4~10분의 반응 시간 후 프리미엄 마이크로파이버 타월 두 장으로 압력 없이 제거하며 UV 램프로 잔여물을 확인한다.
  7. 실온에서 비, 풍화, 직사광선 없이 24시간 경화시키고, 완전히 굳을 때까지 10~14일간 세차나 강한 마찰을 피한다.

Also known as: 폴리탑, poly top, POLYTOP NEOX Glaze Ultra, PT NEOX Glaze Ultra, 폴리탑 네옥스 글레이즈 울트라, 15300050

한국어로 보기

Sources

Related products

More from POLYTOP

More Coating products

Explore more