Optimum Opti-Glass Coating
옵티멈 옵티-글래스 코팅
Opti-Glass Coating is a permanent ceramic glass coating that chemically bonds to the glass substrate for long-lasting hydrophobicity and light scratch resistance. Unlike spray sealants, it does not need periodic reapplication and improves wiping efficiency at highway speeds. Professional polishing and decontamination of the glass are required before installation to ensure full adhesion.
Opti-Glass 코팅은 유리 표면에 화학적으로 결합하는 영구 세라믹 코팅입니다. 스프레이 실런트와 달리 주기적인 재시공이 불필요하며, 강력한 발수 성능과 경미한 내스크래치성을 제공합니다. 시공 전 전문적인 폴리싱과 오염 제거가 필요합니다.
- Brand
- OPTI-COAT
- Categories
- Exterior : Glass Sealant
- pH
- acid (3)
Key features
- Permanent ceramic SiO2 glass coating
- Long-lasting hydrophobicity
- Light scratch resistance
- Improves wiper efficiency
- No periodic reapplication needed
Usage
- Decontaminate and polish the glass surface with a dedicated glass polish to remove all water spots, silicone, and residue.
- Wipe the glass with a panel prep solution to ensure a clean, contamination-free surface.
- Apply Opti-Glass Coating to a foam applicator block and spread in thin, overlapping passes onto the glass.
- Allow the coating to flash (turn hazy) for about 1–2 minutes, then level and buff with a clean microfiber towel.
- Avoid water contact for at least a few hours while the coating fully cures.
핵심 특징
- 영구 SiO2 세라믹 유리 코팅
- 장기 지속 발수 효과
- 경미한 내스크래치성
- 와이퍼 효율 향상
- 주기적 재시공 불필요
사용법
- 유리 전용 폴리시로 워터 스팟, 실리콘, 잔여물을 제거하며 표면을 정돈합니다.
- 패널 프렙 용액으로 유리를 닦아 오염이 없는 깨끗한 상태로 준비합니다.
- 폼 어플리케이터 블록에 Opti-Glass 코팅을 소량 덜어 유리에 얇게 겹치며 도포합니다.
- 코팅이 뿌옇게 플래시될 때까지 약 1–2분 두었다가 깨끗한 마이크로파이버 타올로 평탄화합니다.
- 코팅이 완전히 큐어링될 수 있도록 최소 몇 시간 이상 물 접촉을 피합니다.