OPTI-COAT Optimum Ferrex Iron Remover Dilution Ratios & User Guide
옵티멈 페렉스 아이언 리무버
OPTI-COAT Optimum Ferrex Iron Remover — Exterior : Pre-washing (Pretreatment), acid pH, base dilution 1:5. At 1:5, mix about 200 ml of OPTI-COAT Optimum Ferrex Iron Remover per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/opti-coat/optimum-ferrex-iron-remover
OPTI-COAT 옵티멈 페렉스 아이언 리무버 — Exterior : Pre-washing (Pretreatment), pH acid, 기본 희석 1:5. 1:5 기준 물 1L당 OPTI-COAT 옵티멈 페렉스 아이언 리무버 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/opti-coat/optimum-ferrex-iron-remover
Optimum FerreX is a dedicated iron-dissolving spray that chemically bonds to and lifts ferrous particles like brake dust, rail dust, and industrial fallout from painted surfaces and wheel finishes. A vivid color change signals active contamination removal, and the formula rinses away cleanly without abrading the surface.
도장면과 휠에 박힌 브레이크 더스트, 철분 오염물, 산업 낙진을 화학적으로 분해하는 아이언 리무버입니다. 반응 과정에서 뚜렷한 색 변화가 나타나 오염 제거를 눈으로 확인할 수 있으며, 물로 깔끔하게 헹굴 수 있습니다.
- Brand
- OPTI-COAT
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Tire&Wheel Cleaner
- Primary dilution
- 1:5
- pH
- acid
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-09-07
How it works
- Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
- Iron remover (turns purple) — Reacts with iron particles, turning purple with a distinct sulphur smell.
- Cleaning surfactant — Lifts soil off the surface and disperses it in water.
- anionic surfactants — Ionic types of the surfactants used in this product.
- Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Sodium mercaptoacetate | 367-51-1 | Reducing agent |
| 2-butoxyethanol | 111-76-2 | Solvent |
| Sodium dodecyl sulfate | 151-21-3 | Anionic surfactant |
| Sodium xylene sulfonate | 1300-72-7 | Hydrotrope |
| Pentyl acetate | 628-63-7 | Solvent |
| 2-methylbutyl acetate | 624-41-9 | |
| Water | 7732-18-5 | Diluent |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Chemical iron contamination removal
- Visible color-change reaction
- Safe on all wheel finishes
- Paint-safe formula
- Use on cool surfaces out of direct sun
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Pre-washing (Pretreatment) (primary) | 1:5 | 1:5 |
Usage
- Rinse the surface and confirm the wheel or paint panel is cool and shaded before starting.
- Spray FerreX generously onto the contaminated area, or dilute about 5:1 for use in a foaming applicator.
- Wait about 1-2 minutes while the formula reacts, then agitate any stubborn spots with a soft brush or microfiber.
- Rinse thoroughly with clean water before the product dries on the surface.
핵심 특징
- 화학적 철분 오염 제거
- 색 변화로 반응 확인 가능
- 모든 휠 마감에 안전
- 도장 안전 포뮬러
- 직사광선 차단된 차가운 표면에서 사용
사용법
- 작업 전 표면을 물로 헹구고 휠이나 도장면이 충분히 식어 있고 그늘진 상태인지 확인합니다.
- 오염 부위에 FerreX를 충분히 분사합니다. 포밍 어플리케이터 사용 시 약 5:1로 희석합니다.
- 제품이 반응하도록 약 1-2분 대기한 뒤, 잘 제거되지 않는 부위는 부드러운 브러시로 가볍게 마찰합니다.
- 제품이 마르기 전에 충분한 양의 깨끗한 물로 완전히 헹굽니다.
Also known as: OPTI, 옵티코트, 옵티, opti coat, opticoat, OPTIMUM, optimum, 옵티멈, FerreX, OPT FerreX, Optimum Iron Remover, 옵티멈 페렉스
Sources
Related products
More from OPTI-COAT
- Scangrip MULTIMATCH 3 CONNECT
- Scangrip SUNMATCH 4
- Optimum Glaze, Polish & Seal GPS Spray
- Scangrip POWER SUPPLY CONNECT
- Boar Detailing Brush Large
- Optimum Assure One-Step Disinfectant
More Pre-washing (Pretreatment) products
- Alchimy7 Super Multi-Purpose Degreaser
- ADBL Slippy
- Revello Prewash
- GOOD STUFF Traffic Film Remover
- Carbon Collective Citrus Cleanser 2.0
- ADBL APC Typhoon