OPTI-COAT 옵티멈 페렉스 아이언 리무버 희석비 & 사용 가이드

OPTI-COAT 옵티멈 페렉스 아이언 리무버 희석비 pH 스펙 카드

Optimum Ferrex Iron Remover

도장면과 휠에 박힌 브레이크 더스트, 철분 오염물, 산업 낙진을 화학적으로 분해하는 아이언 리무버입니다. 반응 과정에서 뚜렷한 색 변화가 나타나 오염 제거를 눈으로 확인할 수 있으며, 물로 깔끔하게 헹굴 수 있습니다.

브랜드
OPTI-COAT
카테고리
Exterior : Pre-washing (Pretreatment), Exterior : Tire&Wheel Cleaner
기본 희석 비율
1:5
pH
acid
최종 업데이트
2026-05-03

핵심 특징

희석 비율

용도희석비율
Exterior : Pre-washing (Pretreatment) (기본)1:51:5

사용법

  1. 작업 전 표면을 물로 헹구고 휠이나 도장면이 충분히 식어 있고 그늘진 상태인지 확인합니다.
  2. 오염 부위에 FerreX를 충분히 분사합니다. 포밍 어플리케이터 사용 시 약 5:1로 희석합니다.
  3. 제품이 반응하도록 약 1-2분 대기한 뒤, 잘 제거되지 않는 부위는 부드러운 브러시로 가볍게 마찰합니다.
  4. 제품이 마르기 전에 충분한 양의 깨끗한 물로 완전히 헹굽니다.

Optimum FerreX is a dedicated iron-dissolving spray that chemically bonds to and lifts ferrous particles like brake dust, rail dust, and industrial fallout from painted surfaces and wheel finishes. A vivid color change signals active contamination removal, and the formula rinses away cleanly without abrading the surface.

Key features

  • Chemical iron contamination removal
  • Visible color-change reaction
  • Safe on all wheel finishes
  • Paint-safe formula
  • Use on cool surfaces out of direct sun

Usage

  1. Rinse the surface and confirm the wheel or paint panel is cool and shaded before starting.
  2. Spray FerreX generously onto the contaminated area, or dilute about 5:1 for use in a foaming applicator.
  3. Wait about 1-2 minutes while the formula reacts, then agitate any stubborn spots with a soft brush or microfiber.
  4. Rinse thoroughly with clean water before the product dries on the surface.

다른 이름: OPTI, 옵티코트, 옵티, opti coat, opticoat, OPTIMUM, optimum, 옵티멈, FerreX, OPT FerreX, Optimum Iron Remover, 옵티멈 페렉스

View in English

출처

관련 제품

OPTI-COAT의 다른 제품

같은 카테고리(Pre-washing (Pretreatment)) 제품

더 보기