Remover XX LOW
리무버 XX LOW
니하치 · 니하치프로 · nihachi · Nihachi Pro Remover XX LOW · 28pro Remover XX LOW · Remover Double-X Low · XX LOW Acid Scale Remover · リムーバーXX LOW · 니하치 프로 리무버 XX LOW · 28프로 리무버 XX LOW · 리무버 더블엑스 로우 · 산성 스케일 제거제 LOW · NihachiPro Remover XX LOW
A professional-grade acidic scale remover with a gentler formulation than Remover XX HIGH. It chemically dissolves and lifts ion deposits, water spots, scale buildup, dark staining, and iron fallout without abrasion, while minimizing the risk of surface damage.
리무버 XX HIGH보다 완화된 산성 스케일 제거제입니다. 연마 없이 이온 디포짓, 물자국, 스케일, 흑화 오염, 철분 등을 화학적으로 분해·제거하며, 소재에 대한 공격성을 낮춰 안전하게 사용할 수 있습니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Remover
- Primary dilution
- RTU
- pH
- acid
Key features
- Lower aggression acid formula compared to HIGH variant
- Dissolves ion deposits, mineral scale, and dark staining without polishing
- Removes iron fallout and coating residue buildup
- Restores hidden gloss obscured by surface contamination
- For professional use; test on inconspicuous area before full application
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Wash the vehicle and wipe off all moisture before starting.
- Apply a small amount of the product to a sponge or microfiber cloth and spread it over the affected area (ion deposits, scale, water spots).
- Without delay, gently wipe the treated surface with the same cloth, being careful not to cause scratches.
- Immediately wipe off the product with a clean, damp cloth; move to the next panel and repeat. Never allow the product to dry on the surface.
- Rinse thoroughly with water and wipe dry. To fully neutralize residual acid, use an alkaline degreasing wash.
- Apply a protective coating to protect the exposed paint surface.
- Always wear protective gloves, goggles, and a mask during use. Do not spray; never mix with other chemicals. Avoid use on laminated glass, chrome wheels, bare aluminum, or anodized parts.
핵심 특징
- HIGH 타입 대비 소재 공격성이 낮은 산성 포뮬러
- 연마 없이 이온 디포짓·스케일·흑화 오염 분해 제거
- 철분 및 코팅 노폐물 제거
- 오염으로 가려진 광택 복원
- 전문가용; 전체 시공 전 눈에 띄지 않는 부위에서 반드시 테스트
사용법
- 세차 후 물기를 완전히 닦아냅니다.
- 스펀지 또는 마이크로파이버 클로스에 소량을 묻혀 이온 디포짓·스케일·물자국 부위에 고르게 펴 바릅니다.
- 시간을 두지 않고 같은 클로스로 스크래치가 생기지 않도록 가볍게 문질러 닦습니다.
- 즉시 깨끗한 천을 물에 적셔 짜낸 후 시공 부위를 닦고, 다음 패널로 이동해 동일하게 시공합니다. 절대 건조시키지 마십시오.
- 깨끗한 물로 충분히 헹군 뒤 물기를 닦습니다. 산을 완전히 중화하려면 알칼리성 탈지 세정제를 사용하십시오.
- 노출된 도장면을 보호하기 위해 코팅제를 시공합니다.
- 사용 시 반드시 보호 장갑·고글·마스크를 착용합니다. 스프레이 분무 금지, 다른 약품과 혼합 금지. 접합 유리·크롬 휠·무도장 알루미늄·아노다이징 파츠에는 사용 불가.