Nihachi Pro No.999e F User Guide

Nihachi Pro No.999e F dilution ratio and pH specification chart

Nihachi Pro No.999e F — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nihachi-pro/no-999e-f

Nihachi Pro No.999e F — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nihachi-pro/no-999e-f

A long-duration nano carbon coating using single-walled carbon nanotube technology that penetrates and bonds to painted surfaces without curing hard. It delivers over three years of coating durability, superior water repellency, exceptional anti-fouling, antistatic protection, and a deep gloss finish — with a stress-free application that eliminates the risk of wipe-off marks hardening on the paint.

단층 카본 나노튜브 기술을 적용한 장기 지속형 나노 카본 코팅제입니다. 경화형과 달리 도장면에 침투 정착하는 구조로, 3년 이상의 피막 지속, 강력한 발수, 탁월한 방오성, 대전 방지 효과를 발휘합니다. 닦기 실수로 인한 얼룩 고착 스트레스 없이 시공할 수 있는 것이 최대 특징입니다.

Brand
Nihachi Pro
Categories
Exterior : Coating
Last updated
2026-06-08

Key features

Usage

  1. Wash the vehicle thoroughly and wipe off all moisture. Proper surface preparation (decontamination, degreasing) significantly improves coating adhesion.
  2. Shake the bottle well before use; the product is a separated type. Work in a shaded area away from direct sunlight and heat. The surface must be dry.
  3. Apply the coating to the entire vehicle surface using a clean applicator cloth or MF sponge. Spread without allowing puddles or droplets to form.
  4. Leave the applied coating undisturbed in the shade for 1 hour. Do not allow it to dry in direct sunlight.
  5. Rinse off excess coating with water. The film is already formed at this stage.
  6. Wipe off remaining water and check the finish carefully for any uneven areas.
  7. Initial curing takes approximately 2 hours; full cure and stable gloss is achieved within 2 days. The vehicle can be washed between initial and full cure if needed.

핵심 특징

  • 3년 이상 피막 지속형 나노 카본 코팅
  • 침투 정착 구조 — 경화형 코팅의 닦기 얼룩 고착 스트레스 없음
  • 강력한 발수·방오·대전 방지 성능
  • 자기 수복형 클리어·일반 클리어 도장에 모두 대응
  • 도장면, 무도장 수지, 고무, 크롬, 헤드라이트, 휠에 시공 가능
  • No.320 F 탑코팅과 조합 시 방오성·광택 극대화

사용법

  1. 세차 후 물기를 완전히 닦습니다. 충분한 전처리(오염 제거, 탈지)를 하면 코팅 정착성이 크게 향상됩니다.
  2. 사용 전 충분히 흔들어 섞어줍니다(세퍼레이트 타입). 직사광선·고온을 피한 그늘에서 건식 상태로 시공합니다.
  3. 깨끗한 클로스 또는 MF 스펀지에 코팅제를 적당량 묻혀 차체 전면에 고르게 펴 바릅니다. 물방울 형태로 고이지 않도록 얇고 균일하게 도포합니다.
  4. 도포 후 직사광선을 피한 그늘에서 1시간 방치합니다. 절대 직사광선 아래에서 건조시키지 마십시오.
  5. 물로 잉여분을 세척해 냅니다. 이 시점에 피막은 이미 형성되어 있습니다.
  6. 물기를 닦고 얼룩 등이 없는지 꼼꼼히 확인합니다.
  7. 초기 정착은 약 2시간, 완전 정착 및 안정적인 광택은 2일 이내에 형성됩니다. 초기~완전 정착 사이에도 세차는 가능합니다.

Also known as: 니하치, 니하치프로, nihachi, 서일본케미컬, 서일본 케미컬, 서일본케미칼, Nihachi Pro No.999e F, 28pro No.999e F, N°999e F, 999e F, 999e“F” Nano Carbon Coating, 나노카본 초내구 코팅 999e F, 니하치 프로 No.999e F, 28프로 No.999e F, 슬리나인이에프, 나노카본 코팅 999e, NihachiPro 999e F

한국어로 보기

Sources

Related products

More from Nihachi Pro

More Coating products

Explore more