Rapid Ceramic Spray
래피드 세라믹 스프레이
A tropical-scented spray-and-buff ceramic hybrid sealant that bonds to paintwork to deliver up to three months of hydrophobic protection. It can be applied to wet or dry paint, requires minimal prep work and is compatible as a top-up over UHD Ceramic Coating, LifeShine Exterior Protection, Ultra Deep Shine, Extra Gloss Protection and Polar Seal. A single coat adds a visible gloss finish and makes future cleaning easier.
트로피컬 향이 가미된 분사 후 버핑형 세라믹 하이브리드 실란트로, 도장면에 결합하여 최대 3개월간 발수 보호 효과를 제공합니다. 사전 작업이 거의 필요 없으며 젖은 도장과 마른 도장 모두에 도포할 수 있고 UHD Ceramic Coating, LifeShine Exterior Protection, Ultra Deep Shine, Extra Gloss Protection, Polar Seal 위에 탑업용으로도 사용할 수 있습니다. 한 번만 도포해도 깊은 광택이 살아나고 이후 세차가 한결 수월해집니다.
- Brand
- Auto Glym
- Categories
- Exterior : Coating, Exterior : Quick Detailer
Key features
- Ceramic hybrid spray-and-buff sealant
- Up to three months of hydrophobic protection
- Applies to wet or dry paintwork
- Adds visible deep gloss finish
- Compatible as top-up over many Autoglym protectants
- Tropical scented formula
Usage
- Wash the car thoroughly and remove fallout with Magma or the Clay Detailing Complete Kit; avoid direct sunlight and surfaces over 25°C.
- Shake well and work an area no larger than shoulder-width at a time, on wet or dry paint.
- On dry paint, spray sparingly onto the panel or onto a clean microfibre applicator and spread evenly.
- On wet paint, spray sparingly onto the panel and spread with an Autoglym InstaDry.
- Use two to three sprays per panel (no more than two on small panels) and buff to a high gloss with a clean Hi-Tech Microfibre Finishing Cloth, changing cloths as needed.
- Allow 24 hours between applications if a second coat is required.
핵심 특징
- 스프레이 앤 버프 방식 세라믹 하이브리드 실란트
- 최대 3개월간 발수 보호
- 젖은 도장·마른 도장 모두 도포 가능
- 선명한 딥 글로스 마감
- 다양한 오토글림 보호제 위에 탑업 가능
- 트로피컬 향
사용법
- Magma 또는 Clay Detailing Complete Kit으로 폴아웃까지 제거하며 세차하고, 직사광선과 25°C 이상의 도장면을 피합니다.
- 제품을 잘 흔든 뒤 한 번에 어깨너비 이하 면적씩 작업하며 젖은 도장과 마른 도장 모두 가능합니다.
- 마른 도장에는 패널 또는 깨끗한 마이크로파이버 어플리케이터에 가볍게 분사하여 고르게 펴 바릅니다.
- 젖은 도장에는 패널에 가볍게 분사한 뒤 오토글림 InstaDry로 펴 바릅니다.
- 패널당 2~3회 분사(작은 패널은 2회 이하)를 적용하고 Hi-Tech Microfibre Finishing Cloth로 광택이 날 때까지 버핑하며 필요 시 천을 교체합니다.
- 2차 도포가 필요한 경우 24시간 간격을 두고 진행합니다.