28QD
니하치 · 니하치프로 · nihachi · Nihachi Pro 28QD · 28pro 28QD · 28 Quick Detailer · 28QD 100ml · 28QD Sacrificial Film Quick Detailer · QD28 · 니하치 프로 28QD · 28프로 28QD · 28 퀵 디테일러 · 28큐디 · 28QD 희생피막 복원 퀵 디테일러
28QD is a quick detailer combining a specialized cleaning agent with a sacrificial-film restoration coating. It gently lifts surface contamination while simultaneously rebuilding the sacrificial protection layer on top of existing coatings, improving adhesion and gloss without the need for a full acid-scale remover or oil-based cleanser.
28QD는 특수 클리너와 희생피막 복원 코팅제를 결합한 퀵 디테일러입니다. 기존 코팅 위의 오염물을 가볍게 제거하면서 동시에 희생피막을 복원하여 코팅의 밀착력과 광택을 향상시킵니다. 산성 스케일 제거제나 유성 클리너를 사용할 필요 없이 샴푸 세차 이후 간편하게 사용할 수 있습니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Quick Detailer
- Primary dilution
- RTU
Key features
- Dual-action formula: cleans surface contamination and restores sacrificial coating film in one step
- Enhances bonding and penetration of subsequent coatings (confirmed compatibility with No.999e F)
- Produces deep, natural gloss without artificial over-shine
- Usable as a pre-treatment or primer before applying other coatings
- Anti-static agent and metallic conductant included for electrostatic discharge
- Apply without pressure — spreading motion only to avoid scratching
- Works both dry and wet; wet application reduces cleaning intensity
Dilution
- Exterior : Quick Detailer — RTU (1:0) (primary)
Usage
- Wash the vehicle thoroughly and remove all contaminants. Wipe off moisture.
- Shake the bottle well before use (agitation ball included).
- Apply a small amount of product to a clean microfiber cloth.
- Working one panel at a time, spread the product gently without applying pressure. Do not press down.
- Wipe off with a clean cloth, removing any unevenness. Move to the next panel and repeat.
- If desired, after wiping in 28QD, apply a sacrificial-film coating or quick detailer over the top and finish simultaneously (advanced method).
- If concerned about residue causing spots, rinse with water after finishing.
- Work in the shade, away from direct sunlight and high heat. Wear protective gloves, mask, and goggles.
핵심 특징
- 오염 제거와 희생피막 복원을 동시에 수행하는 이중 기능 포뮬라
- 후속 코팅(No.999e F 등)의 밀착력을 향상시키는 것이 확인됨
- 인위적인 광택이 아닌 차량 본연의 깊은 광택 구현
- 다른 코팅제 시공 전 전처리 또는 하도제로 활용 가능
- 대전 방지제 및 금속계 도전제 배합으로 정전기 방전 효과
- 압력을 가하지 말고 도포하는 방식으로만 사용 — 가압 시 스크래치 발생 위험
- 건식·습식 시공 모두 가능하며, 습식 적용 시 세정력 완화
사용법
- 차량을 충분히 세차하여 오염물을 제거한 후 수분을 닦아냅니다.
- 사용 전 병을 충분히 흔들어 내용물을 잘 섞어줍니다(교반 볼 내장).
- 깨끗한 마이크로파이버 클로스에 제품을 소량 덜어냅니다.
- 한 패널씩 압력을 가하지 않고 가볍게 도포합니다. 절대 누르지 마세요.
- 깨끗한 클로스로 고르게 닦아내고, 다음 패널로 이동하여 반복합니다.
- 원하는 경우, 28QD 도포 후 희생피막 복원 코팅제나 퀵 디테일러를 위에 덧발라 동시에 마무리하는 응용 시공도 가능합니다.
- 세정제 잔류로 인한 물자국이 걱정될 경우, 시공 후 물로 충분히 헹궈냅니다.
- 직사광선, 고온 환경을 피해 그늘에서 시공하며, 보호 장갑·마스크·보안경을 착용하세요.