Nihachi Pro 28QD 희석비 & 사용 가이드

Nihachi Pro 28QD 희석비 pH 스펙 카드

28QD는 특수 클리너와 희생피막 복원 코팅제를 결합한 퀵 디테일러입니다. 기존 코팅 위의 오염물을 가볍게 제거하면서 동시에 희생피막을 복원하여 코팅의 밀착력과 광택을 향상시킵니다. 산성 스케일 제거제나 유성 클리너를 사용할 필요 없이 샴푸 세차 이후 간편하게 사용할 수 있습니다.

브랜드
Nihachi Pro
카테고리
Exterior : Quick Detailer
기본 희석 비율
RTU
최종 업데이트
2026-06-08

핵심 특징

희석 비율

용도희석비율
Exterior : Quick Detailer (기본)RTU1:0

사용법

  1. 차량을 충분히 세차하여 오염물을 제거한 후 수분을 닦아냅니다.
  2. 사용 전 병을 충분히 흔들어 내용물을 잘 섞어줍니다(교반 볼 내장).
  3. 깨끗한 마이크로파이버 클로스에 제품을 소량 덜어냅니다.
  4. 한 패널씩 압력을 가하지 않고 가볍게 도포합니다. 절대 누르지 마세요.
  5. 깨끗한 클로스로 고르게 닦아내고, 다음 패널로 이동하여 반복합니다.
  6. 원하는 경우, 28QD 도포 후 희생피막 복원 코팅제나 퀵 디테일러를 위에 덧발라 동시에 마무리하는 응용 시공도 가능합니다.
  7. 세정제 잔류로 인한 물자국이 걱정될 경우, 시공 후 물로 충분히 헹궈냅니다.
  8. 직사광선, 고온 환경을 피해 그늘에서 시공하며, 보호 장갑·마스크·보안경을 착용하세요.

28QD is a quick detailer combining a specialized cleaning agent with a sacrificial-film restoration coating. It gently lifts surface contamination while simultaneously rebuilding the sacrificial protection layer on top of existing coatings, improving adhesion and gloss without the need for a full acid-scale remover or oil-based cleanser.

Key features

  • Dual-action formula: cleans surface contamination and restores sacrificial coating film in one step
  • Enhances bonding and penetration of subsequent coatings (confirmed compatibility with No.999e F)
  • Produces deep, natural gloss without artificial over-shine
  • Usable as a pre-treatment or primer before applying other coatings
  • Anti-static agent and metallic conductant included for electrostatic discharge
  • Apply without pressure — spreading motion only to avoid scratching
  • Works both dry and wet; wet application reduces cleaning intensity

Usage

  1. Wash the vehicle thoroughly and remove all contaminants. Wipe off moisture.
  2. Shake the bottle well before use (agitation ball included).
  3. Apply a small amount of product to a clean microfiber cloth.
  4. Working one panel at a time, spread the product gently without applying pressure. Do not press down.
  5. Wipe off with a clean cloth, removing any unevenness. Move to the next panel and repeat.
  6. If desired, after wiping in 28QD, apply a sacrificial-film coating or quick detailer over the top and finish simultaneously (advanced method).
  7. If concerned about residue causing spots, rinse with water after finishing.
  8. Work in the shade, away from direct sunlight and high heat. Wear protective gloves, mask, and goggles.

다른 이름: 니하치, 니하치프로, nihachi, 서일본케미컬, 서일본 케미컬, 서일본케미칼, Nihachi Pro 28QD, 28pro 28QD, 28 Quick Detailer, 28QD 100ml, 28QD Sacrificial Film Quick Detailer, QD28, 니하치 프로 28QD, 28프로 28QD, 28 퀵 디테일러, 28큐디, 28QD 희생피막 복원 퀵 디테일러

View in English

출처

관련 제품

Nihachi Pro의 다른 제품

같은 카테고리(Quick Detailer) 제품

더 보기