TOP KOTE T3
탑 코트 티쓰리
NANOSKIN Ultra Line TOP KOTE T3 is a professional-grade, self-leveling ceramic coating that delivers 3–5 year durability in a single layer, producing deep gloss and extreme water beading on cars, boats, bikes, and more. Its thick self-leveling formulation eliminates the need for multiple coats and complex leveling techniques, and the complete kit includes all necessary tools for straightforward DIY application.
나노스킨 울트라 라인 탑 코트 T3는 자동 레벨링 기능을 갖춘 프로 등급 세라믹 코팅으로, 자동차, 보트, 바이크 등에 단일 레이어로 3~5년 내구성, 깊은 광택, 강력한 발수성을 구현합니다. 두꺼운 자동 레벨링 포뮬라로 다중 도포나 복잡한 레벨링 작업 없이 시공 가능하며, 필요한 모든 도구가 포함된 키트로 제공됩니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Coating
Key features
- Professional-grade self-leveling ceramic formulation
- 3–5 year durability in a single application
- Deep gloss and high depth of color in one layer
- Extreme water beading and sheeting
- Seals microscopic pores for a hard, glassy surface
- Suitable for cars, boats, bikes, and more
- Complete kit: T3, foam applicator, nitrile gloves, microfiber towel
Usage
- Work indoors; the vehicle must remain inside for at least 12 hours after application.
- Thoroughly wash the vehicle to remove dust, sand, and dirt.
- Decontaminate the paint surface using a clay bar or surface prep tool to remove bonded contaminants.
- If needed, polish to correct swirls, scratches, or other paint imperfections.
- Wipe the paint with IPA 70% on a microfiber cloth to remove oil and polish residues.
- Soak the foam applicator with T3 (8–10 drops per 2 sq ft) and spread evenly over the surface.
- Allow the coating to haze for 10–15 minutes (time varies with temperature and humidity), then remove residue with a microfiber cloth.
핵심 특징
- 자동 레벨링 기능의 프로 등급 세라믹 포뮬라
- 1회 시공으로 3~5년 내구성
- 단일 레이어로 깊은 광택과 높은 색 심도 구현
- 강력한 발수성 — 물방울 맺힘 및 흘러내림
- 미세 기공을 봉인하여 딱딱하고 유리 같은 표면 형성
- 자동차, 보트, 바이크 등에 적합
- 키트 구성: T3, 폼 어플리케이터, 니트릴 장갑, 마이크로파이버 타월 포함
사용법
- 실내에서 작업하며, 도포 후 최소 12시간 동안 차량을 실내에 보관합니다.
- 먼지, 모래, 오염물이 없도록 차량을 깨끗이 세차합니다.
- 클레이 바 또는 표면 전처리 도구로 도장 표면의 오염물을 제거합니다.
- 필요한 경우 미세 스크래치, 소용돌이 흠집, 결함을 폴리싱으로 교정합니다.
- 마이크로파이버 천에 IPA 70%를 묻혀 도장면을 닦아 오일 및 폴리시 잔여물을 제거합니다.
- 폼 어플리케이터에 T3를 충분히 묻히고(약 0.2㎡당 8~10방울) 표면에 고르게 펴 바릅니다.
- 10~15분간 헤이징되도록 두고(온도 및 습도에 따라 시간이 달라질 수 있음), 마이크로파이버 타월로 잔여물을 제거합니다.