NANOSKIN Concentrated Low PH Shampoo Dilution Ratios & User Guide

NANOSKIN Concentrated Low PH Shampoo dilution ratio and pH specification chart

컨센트레이티드 로우 피에이치 샴푸

NANOSKIN Concentrated Low PH Shampoo — Exterior : Pre-washing (Pretreatment), acid pH, base dilution 1:1500. At 1:1500, mix about 0.7 ml of NANOSKIN Concentrated Low PH Shampoo per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/nanoskin/concentrated-low-ph-shampoo

NANOSKIN 컨센트레이티드 로우 피에이치 샴푸 — Exterior : Pre-washing (Pretreatment), pH acid, 기본 희석 1:1500. 1:1500 기준 물 1L당 NANOSKIN 컨센트레이티드 로우 피에이치 샴푸 약 0.7ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/nanoskin/concentrated-low-ph-shampoo

NANOSKIN Concentrated Low PH Shampoo is a high-foaming acid-based pre-soak for tunnel and touchless automatic car wash systems, concentrated at 1500:1. The low-pH formula helps neutralize alkaline residues and brighten surfaces and is hydrofluoric acid-free for operator and equipment safety.

나노스킨 컨센트레이티드 로우 피에이치 샴푸는 터널 및 비접촉 자동 세차 시스템용 고발포 산성 프리소크로, 1500:1 농축액입니다. 저pH 배합이 알칼리 잔류물을 중화하고 표면을 정돈하는 데 도움을 주며, 작업자와 장비를 위해 불산을 사용하지 않습니다.

Brand
NANOSKIN
Categories
Exterior : Pre-washing (Pretreatment), Exterior : Foam
Primary dilution
1:1500
pH
acid (3)
Last updated
2026-05-26

Key features

Dilution

UseDilutionRatio
Exterior : Pre-washing (Pretreatment) (primary)1:15001:1500

Usage

  1. Dilute at 1500:1 with fresh water; adjust slightly for heavy soiling without exceeding the recommended concentration.
  2. Apply at low pressure via foamer units, direct injection equipment, hydrominder premix tanks, manual brush, or hand wash systems.
  3. Let foam dwell on the vehicle for 15 to 30 seconds; do not let the product dry on the surface.
  4. Rinse thoroughly with high-pressure water; follow with a drying agent or rinse aid for best results.
  5. Do not use on hot surfaces or in direct sunlight.

핵심 특징

  • 1500:1 농축 희석
  • 표면 접촉 시간을 늘리는 밀착 거품
  • 알칼리 잔류물 중화에 도움이 되는 저pH
  • 불산 무첨가
  • 터널·비접촉·폼 유닛·하이드로마인더 시스템용
  • 얼룩 없이 깔끔하게 헹굼

사용법

  1. 깨끗한 물로 1500:1로 희석하고, 오염이 심하면 권장 농도를 넘기지 않는 범위에서 약간 조정합니다.
  2. 폼 유닛, 직접 주입 장비, 하이드로마인더 프리믹스 탱크, 수동 브러시 또는 수세 방식으로 저압 도포합니다.
  3. 거품을 차량 표면에서 15~30초간 유지하고, 표면에서 마르지 않게 합니다.
  4. 고압수로 충분히 헹구고, 마무리 결과를 위해 드라이잉 에이전트나 린스 보조제를 사용합니다.
  5. 뜨거운 표면이나 직사광선 아래에서는 사용하지 않습니다.

Also known as: 나노스킨, NANOSKIN Concentrated Low PH Shampoo, NS Concentrated Low PH Shampoo, CLPS, NANOSKIN CLPS, NS CLPS, 나노스킨 컨센트레이티드 로우 피에이치 샴푸, 나노스킨 CLPS, NA-CLS640

한국어로 보기

Sources

Related products

More from NANOSKIN

More Pre-washing (Pretreatment) products

Explore more