Si3D Leather
Si3D 레더 (가죽 실란트)
Nanolex Si3D Leather is a revolutionary ceramic coating for automotive leather, formulated with innovative organopolysilazane technology to form a tough yet flexible protective film. It increases leather's natural resistance to abrasion, discoloration, liquid spills and UV rays while remaining completely invisible and preserving the original look and feel. Durability is rated at 30,000 km or 30 cleaning cycles.
Nanolex Si3D Leather는 혁신적인 오르가노폴리실라잔(organopolysilazane) 기술로 제조된 자동차 가죽 전용 세라믹 코팅으로, 단단하면서도 유연한 보호막을 형성합니다. 가죽의 마모, 변색, 액체 얼룩, 자외선에 대한 자연 저항성을 높이면서도 완전히 보이지 않아 본래의 외관과 촉감을 그대로 유지시킵니다. 내구성은 30,000km 또는 30회 세척에 달합니다.
- Brand
- Nanolex
- Categories
- Interior : Leather Sealants
Key features
- Excellent hydrophobicity – repels water and stains and preserves the cleanliness and integrity of your leather
- UV protection – protects against harmful UV rays and prevents leather from fading and aging
- Improved durability – enhances the natural strength of leather and preserves its texture and appearance with a durability of 30,000 km or 30 cleaning cycles
- Effortless application – easy to apply, providing an even coating and optimal adhesion
- Made in Germany – developed, tested and produced in Germany
- Very long-lasting protection for 30,000 km or 30 cleaning cycles
- Made with innovative organopolysilazane technology
Usage
- Conditions: work at 5–30°C and 30–70% humidity, in a shady spot away from direct sunlight. Wear appropriate personal protective equipment.
- Cleaning: thoroughly clean the leather with Nanolex Interior Cleaner to remove dirt, oils and deposits. Wipe with demineralized water and a clean microfiber cloth to ensure good adhesion. Allow leather to dry completely.
- Application: apply 5–7 drops to an applicator wipe or applicator block. Apply in a thin, even layer to the leather, working in small sections with crisscrossing motions to ensure even coverage and penetration.
- Dwell: leave the product on the leather for 2–3 minutes. Gently wipe off any excess product with a clean, soft microfiber cloth using light movements and avoiding pressure.
- Curing: allow the treated leather to dry and cure for at least 24 hours in a well-ventilated area away from direct sunlight. Avoid contact with the surfaces during this time.
핵심 특징
- 뛰어난 발수성 – 물과 얼룩을 튕겨내어 가죽의 청결과 무결성을 유지
- UV 보호 – 유해한 자외선으로부터 보호하여 가죽 변색 및 노화 방지
- 내구성 향상 – 가죽의 자연 강도를 강화하고 30,000km 또는 30회 세척의 내구성으로 질감과 외관 보존
- 쉬운 도포 – 균일한 코팅과 최적의 접착력을 제공하여 도포가 간편
- 독일 제조 – 독일에서 개발, 테스트, 생산
- 30,000km 또는 30회 세척에 달하는 매우 긴 보호 효과
- 혁신적인 오르가노폴리실라잔 기술로 제조
사용법
- 작업 조건: 온도 5~30°C, 습도 30~70%에서 직사광선이 없는 그늘진 곳에서 작업합니다. 적절한 개인 보호 장비를 착용합니다.
- 세척: Nanolex Interior Cleaner로 가죽을 철저히 세척하여 먼지, 오일, 침전물을 제거합니다. 접착력을 위해 탈이온수와 깨끗한 마이크로화이버 타월로 닦아냅니다. 가죽을 완전히 건조시킵니다.
- 도포: 어플리케이터 와이프 또는 어플리케이터 블록에 5~7 방울을 떨어뜨립니다. 가죽 표면에 얇고 균일한 층으로 도포하며, 작은 구역씩 교차하는 동작으로 균일한 도포와 침투를 보장합니다.
- 반응 시간: 가죽 위에서 2~3분 동안 두고, 깨끗한 부드러운 마이크로화이버 타월로 압력을 가하지 않고 가볍게 잔여 제품을 닦아냅니다.
- 경화: 처리된 가죽을 직사광선이 없는 통풍이 잘 되는 곳에서 최소 24시간 동안 건조 및 경화시킵니다. 이 시간 동안 표면에 닿지 않도록 합니다.