Nanolex WashCoat
나놀렉스 워시코트
Nanolex WashCoat is a quick wet sealant applied during the wash that instantly forms a hydrophobic protective layer, making water and dirt bead off and protecting the paintwork from environmental damage. It is applied diluted 1:100 via foam gun or pump sprayer onto the wet vehicle and delivers a glossy finish without additional polishing. Protection lasts roughly 3 washes or about 3,000 km and it is suitable for refreshing existing sealants on all common paint types including matte and metallic finishes.
Nanolex WashCoat는 세차 과정 중에 바로 도포하는 신속 습식 실란트로, 즉시 소수성 보호막을 형성해 물과 오염물이 비드처럼 흘러내리도록 하고 환경적 손상으로부터 도장면을 보호합니다. 1:100으로 희석해 폼건 또는 펌프 스프레이로 젖은 차량에 도포하면 추가 폴리싱 없이도 광택을 부여하며, 약 3회 세차 또는 3,000km 동안 보호 효과가 지속됩니다. 매트 및 메탈릭을 포함한 모든 일반 도장면에 사용할 수 있고 기존 실란트의 재활성화 용도로도 적합합니다.
- Brand
- Nanolex
- Categories
- Exterior : Quick Detailer
- Primary dilution
- 1:100
Key features
- Quick application: easy to apply during the washing process, with no additional polishing required
- Hydrophobic protective layer: makes water and dirt bead off, protects the paintwork from environmental influences
- Long-lasting shine: gives the vehicle a glossy finish that lasts for up to three washes
- Cares for and protects: combines cleaning and protection in a single step
- Easy to use: ideal for regular care and refreshment of paint protection
- Made in Germany: developed, tested, and produced in Germany
Dilution
- Exterior : Quick Detailer — 1:100 (1:100) (primary)
Usage
- Preparation: wash the vehicle thoroughly with Nanolex / GreenX cleaning agents.
- Application: apply Nanolex WashCoat diluted 1:100 with a foam gun or pump sprayer to the wet vehicle.
- Post-treatment: rinse the vehicle again and dry it with a microfiber cloth or blower to achieve a streak-free result.
- The vehicle is ready for use immediately after application.
핵심 특징
- 빠른 도포: 세차 과정 중에 쉽게 사용할 수 있고 별도의 폴리싱이 필요 없음
- 소수성 보호막: 물과 오염물이 비드처럼 흘러내려 환경적 영향으로부터 도장면을 보호
- 지속적인 광택: 최대 3회 세차까지 유지되는 광택 마감
- 관리와 보호: 세정과 보호를 한 단계로 결합
- 사용 편의성: 정기적인 관리와 도장 보호 재활성화에 이상적
- 독일산: 독일에서 개발·테스트·생산되어 높은 품질 기준을 보장
사용법
- 준비: Nanolex 또는 GreenX 세정제로 차량을 깨끗하게 세차합니다.
- 도포: Nanolex WashCoat를 1:100으로 희석해 폼건 또는 펌프 스프레이로 젖은 차량에 도포합니다.
- 후처리: 차량을 다시 헹군 뒤 마이크로화이버 타월이나 블로어로 건조해 얼룩 없는 마감을 만듭니다.
- 도포 직후 바로 차량을 사용할 수 있습니다.