Gelcoat Fine Cut
젤코트 파인 컷
Machine compound for moderately weathered marine gelcoats and boat paint, removing intermediate defects while building a long-lasting, deep wet shine even on dark colours. Spreads easily, wipes off cleanly and prepares the surface for a follow-up high-gloss polish. Contains no silicone oils.
어느 정도 풍화된 보트 젤코트와 도장면을 다듬는 머신 컴파운드로 중간 단계의 결함을 제거하면서도 어두운 색상에서까지 깊고 오래가는 젖은 듯한 광택을 살려 줍니다. 도포와 닦아내기가 가벼워 후속 고광택 폴리싱의 베이스 작업에 적합합니다. 실리콘 오일은 들어 있지 않습니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Polishes
Key features
- Machine compound for medium defects
- For weathered gelcoats and boat paint
- Deep, lasting shine on dark colours
- Easy spread and wipe-off
- Free of silicone oil
Usage
- Place five pea-sized dabs of compound on a Fine Cut Pad mounted to a rotary or DA machine.
- Spread the product across the panel at low speed using a cross-hatch motion.
- Work the area at roughly 1,000 rpm on a rotary, or top speed on a DA polisher.
- Buff out residue with a Polish & Sealing Towel until the surface is clean.
- Seal afterwards with Gelcoat Finish, Marine Protective Sealant or Ceramic Boat Hull to close the surface.
핵심 특징
- 중간 결함 제거 머신 컴파운드
- 풍화된 젤코트·보트 도장용
- 어두운 색에도 깊은 광택
- 도포·제거 모두 수월
- 실리콘 오일 무함유
사용법
- Fine Cut 패드에 콩알만 한 컴파운드를 다섯 방울 정도 떨어뜨립니다.
- 저속으로 십자 방향을 그리며 패널 전체에 약제를 펴 발라 줍니다.
- 로터리는 약 1,000rpm, DA 폴리셔는 최고 속도로 본격 작업을 진행합니다.
- Polish & Sealing Towel로 잔여물을 닦아 매끈하게 마무리합니다.
- 이후 Gelcoat Finish, Marine Protective Sealant 또는 Ceramic Boat Hull로 표면을 봉인해 줍니다.