Koch Chemie Rust Bloom Remover BMP Dilution Ratios & User Guide
플루그로스트엔트페너 BMP
Koch Chemie Rust Bloom Remover BMP — Exterior : Remover, acid pH, base dilution 1:3~1:20. At 1:3, mix about 333.3 ml of Koch Chemie Rust Bloom Remover BMP per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/koch-chemie/flugrostentferner-bmp
Koch Chemie 플루그로스트엔트페너 BMP — Exterior : Remover, pH acid, 기본 희석 1:3~1:20. 1:3 기준 물 1L당 Koch Chemie 플루그로스트엔트페너 BMP 약 333.3ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/koch-chemie/flugrostentferner-bmp
Acidic concentrate that strips inorganic deposits such as flash rust, limescale and embedded brake dust from acid-tolerant paint, glass, ceramic and metal parts. Built-in corrosion inhibitors leave a short-term anti-rust film, and the formula carries Daimler approval.
도장·유리·세라믹·금속 등 산성에 견디는 부위에서 플래시 러스트, 물때, 브레이크 분진 같은 무기 이물질을 떼어내는 산성 농축 세제입니다. 부식 억제 성분이 들어 있어 단기간 부식 방지 막을 남기며, 다임러 승인 처방입니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Remover, Exterior : Tire&Wheel Cleaner
- Primary dilution
- 1:3~1:20
- Concentration rank
- Top 16% of 64 products in its category
- pH
- acid
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-14
How it works
- Strong acid — Strong acid that dissolves mineral deposits; can damage paint and aluminium.
- Cleaning surfactant — Lifts soil off the surface and disperses it in water.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Phosphoric acid | 7664-38-2 | Acid active |
| Poly(oxy-1,2-ethanediyl) alcohol alkoxylate (low-foam nonionic) | 160875-66-1 |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Acidic high-concentrate cleaner
- Targets flash rust, limescale, brake dust
- Includes corrosion inhibitors
- Daimler-approved
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Remover (primary) | 1:3~1:20 | 1:3-20 |
| Exterior : Tire&Wheel Cleaner | 1:3~1:20 | 1:3-20 |
Usage
- Pre-rinse the panels, then wet them with a 1:3 to 1:20 solution chosen by how heavy the soiling is.
- Let the cleaner work briefly and agitate stubborn spots with a brush or sponge if needed.
- Flush every treated area thoroughly with a high-pressure washer.
핵심 특징
- 고농축 산성 세제
- 플래시 러스트·물때·브레이크 분진 제거
- 부식 억제 성분 함유
- 다임러 승인
사용법
- 표면을 먼저 헹군 뒤 오염도에 따라 1:3~1:20 비율로 묽힌 용액을 도포합니다.
- 잠시 반응시키고 잘 떨어지지 않는 부위는 브러시나 스폰지로 살살 문지릅니다.
- 고압 세척기로 처리한 부위를 빠짐없이 헹궈 냅니다.
Also known as: KCX, koch-chemie, 코흐, 코흐케미, FBMP, Koch FBMP, KC FBMP, 코흐케미 플루그로스트, Rust Bloom Remover
Sources
Related products
More from Koch Chemie
- Cosmo-Clean
- Antihologram Sponge orange, honeycomb
- Colourlock Leather & Fur Wash Concentrate
- Foam-Rubber Squeegee Handle
- Quick Finish
- Folienradierer (Vinyl/Foil Eraser)
More Remover products
- CarCandy Premium BSR
- Adam's Polishes Adam's Salt, Mud & Grime Remover
- Ganbass REBOOT-LIGHT
- EWOCAR Bleed
- NANOSKIN TAR SOLVENT
- CarCandy Erase-It