Wheel Cleaner K viscous

펠겐라이니거 K 비스코스

Acidic, gel-like wheel and stainless steel cleaner built around a high phosphoric acid load for use on acid-tolerant materials such as painted alloy or steel rims and stainless steel parts. The thick consistency clings to the surface to extend dwell time and reduce aerosol mist, while a special additive slows drying and corrosion inhibitors look after brake calipers.

산성에 강한 도장 알로이 휠, 스틸 휠, 스테인리스 부품 등에 사용할 수 있도록 인산 함량을 높여 만든 산성 점성 휠·스테인리스 클리너입니다. 젤과 같은 점도가 표면에 오래 머무르며 작용 시간을 늘리고 분무 시 공기 중 비산을 줄여 줍니다. 건조 지연 첨가제와 부식 방지 성분이 함유되어 브레이크 캘리퍼를 함께 보호합니다.

Brand
Koch Chemie
Categories
Exterior : Tire&Wheel Cleaner
Primary dilution
1:2~1:10
pH
acid (0)

Key features

Dilution

Usage

  1. Pre-rinse the wheels, then apply a 1:2 to 1:10 dilution from bottom to top depending on the level of soiling.
  2. Allow the gel to react briefly without letting it run off or dry on the surface.
  3. Agitate stubborn deposits with a sponge or brush only when needed.
  4. Rinse everything off thoroughly with a high-pressure cleaner and buff stainless steel surfaces if required.

핵심 특징

  • 강한 인산 베이스
  • 브레이크 더스트·석회 제거
  • 고점성 젤로 긴 작용 시간
  • 공기 중 분무 비산 감소
  • 건조 지연 첨가제
  • 브레이크 캘리퍼 부식 방지

사용법

  1. 휠을 먼저 헹군 뒤 오염 정도에 따라 1:2~1:10 비율로 희석한 액을 아래에서 위 방향으로 도포합니다.
  2. 흘러내리거나 표면에서 마르지 않도록 잠시만 반응시킵니다.
  3. 잘 떨어지지 않는 오염은 필요할 때만 스펀지나 브러시로 가볍게 문질러 줍니다.
  4. 고압 세척기로 전체 표면을 충분히 헹구고 필요 시 스테인리스 부위는 폴리싱으로 마무리합니다.

Also known as: KCX, koch-chemie, 코흐, 코흐케미, FKV, Koch FKV, KC FKV, 코흐케미 펠겐라이니거 K 비스코스, Felgenreiniger K viskos

한국어로 보기

Sources