Cleaning Clay Mild (Blue)
라이니궁스크네테 블루
Mild detailing clay that lifts bonded contaminants such as tree sap, insect remains, flash rust, industrial fallout, overspray, tar, and water spots from paint and glass without abrading the surface. Useful for deep decontamination ahead of polishing or before fitting fresh wiper blades.
송진, 곤충 잔해, 표면 녹, 산업 분진, 오버스프레이, 타르, 물 자국 같은 고착 오염을 도장면이나 유리에서 표면을 깎지 않고 부드럽게 들어 올리는 마일드 디테일링 클레이입니다. 폴리싱 직전 표면 정리나 새 와이퍼 블레이드 장착 전 처리에 활용하기 좋습니다.
- Brand
- Koch Chemie
- Categories
- Tools : Wash Supplies
Key features
- Mild abrasive grade
- Lifts bonded contaminants
- Safe on paint and glass
- Pre-polish prep tool
Usage
- Pre-wash and rinse the panel with the appropriate cleaners before reaching for the clay.
- Knead the bar into a flat palm-sized piece so it has a fresh contact face.
- Mist the surface with Clay Spray as a lubricant before each pass.
- Glide the clay across the panel with light, even strokes until the area feels smooth and clean.
- Fold any picked-up dirt back into the clay to expose a clean face for the next section.
- After use, lightly moisten the clay and store it in its sealed box so it does not dry out.
핵심 특징
- 마일드 등급
- 고착 오염 제거
- 도장·유리 안전
- 폴리싱 전 표면 준비
사용법
- 클레이를 사용하기 전에 맞는 세정제로 패널을 먼저 세척하고 헹궈 둡니다.
- 클레이를 손바닥만 한 평평한 모양으로 반죽해 새 접촉면을 만듭니다.
- 패스마다 클레이 스프레이를 윤활용으로 표면에 충분히 분사합니다.
- 표면이 매끄럽게 정리될 때까지 가벼운 압력으로 일정하게 클레이를 굴립니다.
- 달라붙은 오염은 안쪽으로 접어 넣어 깨끗한 면이 다시 드러나도록 합니다.
- 사용 후에는 표면을 살짝 적신 뒤 전용 박스에 보관해 마르지 않게 관리합니다.