Ceramic Allround C0.02
세라믹 올라운드 C0.02
Multi-surface ceramic coating that builds a durable hydrophobic layer on exterior paint, plastic trim, and wheels. Designed for cars, motorcycles, RVs, caravans, and boats once the substrate is fully decontaminated and prepped.
도장면, 플라스틱 트림, 휠 등 외장 부품에 강한 발수 보호막을 형성하는 다용도 세라믹 코팅제입니다. 차량, 모터사이클, 캠핑카, 보트 등 사전 탈지·연마가 완료된 외장 표면에 사용합니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Coating
- pH
- alkali
Key features
- Hydrophobic ceramic layer
- Works on paint, plastics, rims
- Apply with Application Towel
- Reactive — keep bottle sealed
Usage
- Pre-wash with an alkaline cleaner such as Green Star at 1:10, and treat tar or resin spots with cleaning clay or Tar Wash A.
- Correct paint defects mechanically using Heavy Cut, Fine Cut, or Micro Cut as the condition requires, following each polish's data sheet.
- Wipe the panels down with silicone and wax remover on a polish and sealing towel; dilute 1:4 with water on sensitive single-stage paint.
- Saturate the Application Towel and spread C0.02 panel by panel in two crossed passes until a thin uniform liquid film is visible.
- Let the coating flash off, then buff with the Coating Towel in light circular motions, checking the result under proper lighting.
- If a second layer is used, wait around 45 minutes; avoid washing the vehicle for at least nine days while the coating cures.
핵심 특징
- 강력한 발수 세라믹 막
- 도장·플라스틱·휠 호환
- 어플리케이션 타올로 도포
- 반응성 제품, 사용 후 밀봉
사용법
- 그린 스타 1:10 등 알칼리 세제로 차량을 사전 세척하고, 타르나 수지 자국은 클레이바나 타르 워시 A로 먼저 처리합니다.
- 도장 상태에 맞춰 헤비컷, 파인컷, 마이크로컷 중 적절한 폴리시로 기계 연마를 진행합니다.
- 폴리시 앤 실링 타올에 실리콘·왁스 리무버를 묻혀 도장면을 닦아 줍니다. 민감한 단도장에는 물과 1:4로 희석합니다.
- 어플리케이션 타올에 제품을 적셔 패널 단위로 두 번 교차 도포하여 얇고 균일한 액막을 만듭니다.
- 플래시 오프가 끝나면 코팅 타올로 가볍게 원을 그리며 닦아내고, 조명을 비춰 잔점이 없는지 확인합니다.
- 두 번째 층을 올릴 때는 약 45분을 기다리고, 9일 동안은 세차를 피해 코팅이 충분히 경화되도록 합니다.