PPF/Vinyl Wrap Coating
PPF/비닐 랩 코팅
Jax Wax PPF/Vinyl Wrap Coating is a flexible 9H ceramic coating that chemically bonds to paint protection film and vinyl wrap, becoming the permanent protective surface of the film or wrap. The formula enhances water and dirt repellency, guards against UV-induced yellowing and staining, and is compatible with gloss, matte, and satin PPF and vinyl. Provides up to two years of protection.
잭스왁스 PPF/비닐 랩 코팅은 페인트 보호 필름과 비닐 랩에 화학적으로 결합해 영구적인 보호막을 형성하는 유연한 9H 세라믹 코팅입니다. 발수성과 오염 차단력을 높이고 자외선으로 인한 황변과 얼룩을 방지하며, 유광·무광·새틴 PPF 및 비닐 모두와 호환됩니다. 최대 2년간 보호 효과를 제공합니다.
- Brand
- Jax Wax
- Categories
- Exterior : PPF Maintenance, Exterior : Coating
Key features
- 9H hardness flexible ceramic coating
- Chemically bonds to PPF and vinyl wrap
- Up to 2 years protection
- Enhanced water and dirt repellency
- UV anti-yellowing and stain resistance
- Compatible with gloss, matte, and satin finishes
Usage
- Ensure the PPF or vinyl surface is clean and dry, then apply prep spray to remove any oils or residue.
- Test the coating on a small inconspicuous area to confirm compatibility before full application.
- Saturate a coating applicator pad and apply the product to one panel at a time in a 2×2 ft section using a crosshatch pattern.
- Once the coating becomes tacky, remove the excess with a clean microfiber leveling towel.
- Keep the coated surface dry for at least 24 hours after application.
핵심 특징
- 9H 경도의 유연한 세라믹 코팅
- PPF 및 비닐 랩에 화학적 결합
- 최대 2년 보호
- 향상된 발수성 및 오염 차단
- 자외선 황변 및 얼룩 방지
- 유광·무광·새틴 마감 모두 호환
사용법
- PPF 또는 비닐 표면이 깨끗하고 완전히 건조되었는지 확인한 후, 프렙 스프레이로 오일이나 잔여물을 제거합니다.
- 전체 시공 전에 눈에 잘 띄지 않는 작은 부위에 코팅을 테스트하여 호환성을 확인합니다.
- 코팅 시공 패드에 제품을 충분히 적신 후, 한 번에 약 60×60cm 면적씩 격자 패턴으로 패널별로 도포합니다.
- 코팅이 끈적해지면 깨끗한 마이크로파이버 레벨링 타월로 잔여물을 닦아냅니다.
- 시공 후 최소 24시간 동안 코팅 표면에 물이 닿지 않도록 합니다.
Also known as: 잭스 왁스, 잭스왁스, 잭스, jax, jaxwax, Jax Wax PPF/Vinyl Wrap Coating, Jax PPF/Vinyl Wrap Coating, JW PPF/Vinyl Wrap Coating, PPFVWC, Jax Wax PPFVWC, Jax PPFVWC, JW PPFVWC, 잭스왁스 PPF/비닐 랩 코팅, 잭스왁스 PPFVWC
한국어로 보기