Spray Pump
스프레이 펌프
innova · 이노바 · 이노바카 · Innovacar Spray Pump · IC Spray Pump · SP · Innovacar SP · IC SP · 이노바카 스프레이 펌프
The Innovacar Spray Pump is a 2-litre manual pre-compression pump offered in acid-resistant and alkaline-resistant versions for applying detailing chemicals at controlled pressure. Each version uses gaskets and seals rated for its pH range and includes a safety valve that releases excess pressure automatically. A continuous-dispensing lock and an adjustable swivel nozzle make application efficient.
이노바카 스프레이 펌프는 2리터 수동 예압식 펌프로, 산성용과 알칼리성용 두 가지로 나와 디테일링 제품을 일정한 압력으로 분사합니다. 각 버전은 해당 pH 범위에 맞는 가스켓과 시일을 쓰며, 과한 압력을 자동으로 빼주는 안전 밸브가 들어 있습니다. 연속 분사 잠금과 조절식 회전 노즐로 효율적으로 도포할 수 있습니다.
- Brand
- Innova Car
- Categories
- Tools : Wash Supplies
Key features
- Acid-resistant and alkaline-resistant versions
- pH-compatible gaskets and seals per version
- Safety valve with automatic pressure relief
- Continuous-dispensing lock button
- 2-litre tank
- Adjustable swivel nozzle for variable spray angle
- Maximum fill-level indicator line
Usage
- On first use, fill with clean water, pump the air piston, and press the white safety valve button to verify it functions correctly, then test water dispensing.
- Before each fill, confirm the pump is depressurised; if pressurised, press the safety valve to release pressure before unscrewing the head.
- Optionally flush with clean water to remove residues from the previous product, then add the diluted product mixture without exceeding the maximum fill line.
- Screw the dispenser head on tightly, pump air with the piston, then spray by pressing the dispensing button; lock the continuous button if preferred and adjust the nozzle angle as needed.
- After use, always release pressure from the pump and disassemble and clean all parts thoroughly. Apply silicone to seals periodically to extend service life.
핵심 특징
- 산성용과 알칼리성용 버전 제공
- 각 버전에 맞는 pH 호환 가스켓과 시일
- 자동 감압 안전 밸브
- 연속 분사 잠금 버튼
- 2리터 탱크
- 분사 각도 조절식 회전 노즐
- 최대 충전 수위 표시선
사용법
- 처음 사용 시 깨끗한 물을 채우고 공기 피스톤을 펌핑한 뒤 흰색 안전 밸브 버튼을 눌러 정상 작동 여부를 확인하고 물 분사를 테스트하세요.
- 매 충전 전 펌프가 감압되었는지 확인하고, 가압 상태라면 안전 밸브를 눌러 압력을 해제한 후 헤드를 풀어주세요.
- 필요 시 깨끗한 물로 내부를 헹궈 이전 제품 잔여물을 제거한 후, 희석된 제품을 최대 수위선을 초과하지 않게 채우세요.
- 분사 헤드를 단단히 조이고 피스톤으로 공기를 펌핑한 후 분사 버튼을 눌러 분사하세요. 필요 시 연속 분사 버튼을 잠그고 노즐 각도를 조절하세요.
- 사용 후 항상 펌프의 압력을 해제하고 모든 부품을 분리하여 철저히 세척하세요. 수명 연장을 위해 주기적으로 시일에 실리콘을 도포하세요.