Nanolex Si3D Trim
나놀렉스 Si3D 트림
Nanolex Si3D Trim is a breakthrough hybrid system that combines restoration of faded exterior plastic trim with ceramic coating properties using state-of-the-art silane technology. It restores natural texture and appearance while providing UV resistance and hydrophobic protection that lasts at least 15,000 km or 12 washes. The bundle includes 30 ml of coating, an applicator block, four suede cloths and a microfiber buffing cloth.
나놀렉스 Si3D 트림은 최첨단 실란 기술을 활용하여 색이 바랜 외장 플라스틱 트림의 복원과 세라믹 코팅 특성을 결합한 혁신적인 하이브리드 시스템입니다. 자연스러운 질감과 외관을 복원하면서 UV 저항성과 발수 보호를 제공하며, 최소 15,000 km 또는 12회 세차의 내구성을 자랑합니다. 번들은 코팅 30 ml, 도포 블록, 스웨이드 천 4매, 마이크로파이버 버핑 천을 포함합니다.
- Brand
- Nanolex
- Categories
- Exterior : Coating
Key features
- UV resistance: excellent protection against harmful UV rays, prevents fading and aging of plastic parts
- Outstanding service life: restores natural texture and appearance for at least 15,000 km or 12 washes
- Hydrophobic properties: effectively repels water and dirt for easier cleaning and maintenance
- Simple application: easy and even to apply, ensuring optimum adhesion and maximum protection
- Specifically developed for automotive trim
- Bundle: Si3D Trim (30 ml), applicator block, four suede cloths, Nanolex Microfiber Buffing Cloth
Usage
- Safety: Wear appropriate personal protective equipment when handling and applying. Refer to the label for further information.
- Optimal conditions: Temperature 5–30°C, humidity 30–70%. Choose a shady spot away from direct sunlight.
- Cleaning: Surfaces must be completely dry and free of contaminants, dust or residue. Clean plastic surfaces with Nanolex PreWash Concentrate followed by Nanolex EX to remove oils, fillers and contaminants.
- Use Nanolex microfiber cloths and change frequently to maintain effectiveness.
- Application: Apply 8–10 drops of Nanolex Si3D Trim to a microfiber application cloth.
- Apply evenly in a criss-cross motion, covering all areas without applying excessive pressure.
- Once evenly distributed, allow the product to evaporate.
- After 2–3 minutes, wipe off residue with a soft microfiber cloth using a gentle touch (no pressure).
- Drying/curing: Allow to cure at room temperature for at least 1 hour in a well-ventilated, non-air-conditioned area; avoid water contact during curing.
핵심 특징
- UV 저항성: 유해 자외선으로부터 플라스틱 부품의 변색 및 노화를 방지하는 탁월한 보호
- 탁월한 수명: 최소 15,000 km 또는 12회 세차 동안 자연스러운 질감과 외관 복원
- 발수성: 물과 오염물을 효과적으로 차단하여 세척과 유지 관리가 용이
- 간편한 도포: 쉽고 균일하게 도포 가능하며 최적의 부착력과 최대 보호 제공
- 자동차 트림용으로 특별히 개발
- 번들: Si3D 트림(30 ml), 도포 블록, 스웨이드 천 4매, 나놀렉스 마이크로파이버 버핑 천
사용법
- 안전: 취급 및 도포 시 적절한 개인 보호 장비를 착용하고, 자세한 내용은 라벨을 참조합니다.
- 최적 조건: 온도 5–30°C, 습도 30–70%. 직사광선이 없는 그늘진 곳에서 작업합니다.
- 세척: 표면은 완전히 건조되고 오염물·먼지·잔여물이 없어야 합니다. 나놀렉스 프리워시 컨센트레이트로 플라스틱 표면을 세척한 다음 나놀렉스 EX로 오일·필러·오염물을 철저히 제거합니다.
- 세척에는 나놀렉스 마이크로파이버 천을 사용하고 효율 유지를 위해 자주 교체합니다.
- 도포: 마이크로파이버 도포용 천에 8–10방울의 Si3D 트림을 도포합니다.
- 과도한 압력 없이 교차 동작으로 모든 부위를 균일하게 도포합니다.
- 고르게 분포되면 제품이 휘발되도록 둡니다.
- 2–3분 후 부드러운 마이크로파이버 천으로 압력을 가하지 않고 잔여물을 닦아냅니다.
- 건조/경화: 통풍이 잘 되고 에어컨이 작동하지 않는 곳에서 실온에서 최소 1시간 경화시키며, 경화 중 물 접촉을 피합니다.