Infinity Wax Wipeout Snowfoam Dilution Ratios & User Guide
와이프아웃 스노우폼
Infinity Wax Wipeout Snowfoam — Exterior : Foam, alkali pH, base dilution 1:5~1:10. At 1:5, mix about 200 ml of Infinity Wax Wipeout Snowfoam per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/infinity-wax/wipeout-snowfoam
Infinity Wax 와이프아웃 스노우폼 — Exterior : Foam, pH alkali, 기본 희석 1:5~1:10. 1:5 기준 물 1L당 Infinity Wax 와이프아웃 스노우폼 약 200ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/infinity-wax/wipeout-snowfoam
Wipeout is a pH-neutral snowfoam designed to safely pre-wash all vehicles and surfaces without harming wax, coatings, or delicate finishes such as matte paint and PPF. Manufactured from gentle emulsifying detergents, it clings well to vertical panels to lift road film and dirt effectively without aggressive chemicals. Its mild formulation makes it especially suited for maintenance washes on ceramic-coated or protected vehicles.
와이프아웃은 왁스·코팅·무광 도장·PPF 등 모든 차량 표면을 손상 없이 사전 세차할 수 있는 pH 중성 스노우폼입니다. 부드러운 유화 세제를 기반으로 수직 패널에 잘 밀착되어 도로 오염물과 먼지를 공격적 화학성분 없이 효과적으로 제거합니다. 세라믹 코팅 차량의 유지 세차에 특히 적합한 순한 포뮬러입니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:5~1:10
- pH
- alkali (8.5)
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-16
How it works
- Cleaning surfactant — Lifts soil off the surface and disperses it in water.
- Alkaline cleaning — Alkaline chemistry that breaks down grease; can stain aluminium and matte finishes.
- anionic/amphoteric surfactants — Ionic types of the surfactants used in this product.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| ALCOHOLS, C12-14, ETHOXYLATED, SULFATES | 68891-38-3 | Anionic surfactant |
| Sulfonic acids, C14-16 (even numbered)-alkane | 68439-57-6 | Anionic surfactant |
| 1-PROPANAMINIUM, 3-AMINO-N | 97862-59-4 | Amphoteric surfactant |
| SODIUM HYDROXIDE | 1310-73-2 | Alkaline active |
| CTION MASS of 5-CHLORO-2-METHYL-2H | 55965-84-9 | Preservative |
| WATER | 7732-18-5 | Diluent |
| DMDM HYDANTOIN | 6440-58-0 | Preservative |
| BASACID YELLOW 226 | 518-47-8 | Colorant |
| Formaldehyde | 50-00-0 | Preservative |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- pH-neutral formula safe on wax and ceramic coatings
- Safe on matte, satin, vinyl wrap, and PPF surfaces
- Strong cling for effective dwell time on vertical surfaces
- Gentle emulsifying detergents lift road film without aggressive chemicals
- Safe on chrome and anodised aluminium trims
- Ideal pre-wash before contact washing
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Foam (primary) | 1:5~1:10 | 1:5-10 |
Usage
- Dilute to the desired concentration: 1:5 for heavy soiling or 1:10 for general use.
- Load the diluted product into a dedicated snowfoam cannon and apply evenly over the vehicle.
- Allow the foam to dwell for 3–5 minutes, then rinse thoroughly with a pressure washer before it dries.
- Follow up with a contact wash using your preferred car shampoo.
핵심 특징
- 왁스·세라믹 코팅에 안전한 pH 중성 포뮬러
- 무광·세틴·랩·PPF 표면에 안전
- 수직면에서 강한 밀착력으로 효과적인 반응 시간 확보
- 공격적 화학성분 없이 도로 오염물을 유화·제거
- 크롬·아노다이징 알루미늄 트림에 안전
- 컨택트 워시 전 사전 세차에 적합
사용법
- 용도에 맞게 희석합니다: 심한 오염은 1:5, 일반 세차는 1:10로 희석하세요.
- 희석된 제품을 스노우폼 캐논에 넣고 차량 전체에 고르게 분사합니다.
- 폼을 3~5분간 반응시킨 후 건조되기 전에 고압 세척기로 완전히 헹굽니다.
- 이후 카 샴푸를 사용하여 컨택트 워시를 진행합니다.
Also known as: 인피니티, 인피니티 왁스, infinity, Infinity Wax Wipeout Snowfoam, IW Wipeout Snowfoam, WS, Infinity Wax WS, IW WS, 인피니티 왁스 와이프아웃 스노우폼
Sources
Related products
More from Infinity Wax
- Inspired By Aventus Blast Can
- HC 4000 Heavy Cut
- Diamond Vision Glass Sealant
- Heavy Cut Compound 1000
- Interior Detailer
- 24K Black
More Foam products
- CARLAB CERISiL FM
- CarPro Lift
- Duel Autocare Snow Job
- Shine group Beading Shampoo
- Revello Foam Prewash
- Obsessed Garage Decontamination Soap