W6 Iron Removing Wheel & Paint Cleaner
W6 아이언 리무빙 휠 & 페인트 클리너
W6 Iron Removing Wheel and Paint Cleaner is a decontamination product that lifts iron particles, brake dust, and stubborn fallout from paintwork, rims, and wheels. The thick, gel-like formula clings to vertical surfaces and includes corrosion inhibitors and additives meant to counter acid rain effects without harming coatings. When the product reacts with ferrous particles it turns purple, signaling the decontamination is at work.
W6 아이언 리무빙 휠 & 페인트 클리너는 도장면, 림, 휠에서 철분 입자, 브레이크 더스트, 고착된 폴아웃을 제거하는 디컨태미네이션 제품입니다. 수직 면에도 잘 붙는 젤 타입 포뮬러로, 부식 억제제와 산성비 대응 첨가제를 함유해 코팅을 손상시키지 않습니다. 철분과 반응하면 보라색으로 변해 디컨 작업이 진행 중임을 시각적으로 보여 줍니다.
- Brand
- GTECHNIQ
- Categories
- Exterior : Remover
- pH
- acid (3)
Key features
- Removes iron particles, brake dust, and industrial fallout
- Gel formula clings to vertical surfaces
- Includes corrosion inhibitors and acid-rain additives
- Safe on paint, wheels, and trim
- Turns purple when reacting with iron
- No coating damage or residue
- Acts as a degreaser on rims and trim
Usage
- Work in a ventilated area and out of direct sunlight.
- Pre-rinse loose dirt with a hose or jet wash.
- Shake well and wear gloves.
- Spray W6 directly onto the surface and dwell for 3 to 5 minutes; ferrous particles will dissolve into a purple solution.
- Do not let the product dry on the surface.
- Rinse off and repeat if needed.
- On heavily soiled areas, agitate W6 with an MF1 ZeroR cloth or soft bristled brush.
- Store in a cool, dry place.
- Use within 12 months of opening.
핵심 특징
- 철분 입자·브레이크 더스트·산업 폴아웃 제거
- 수직 면에도 밀착되는 젤 포뮬러
- 부식 억제제·산성비 대응 첨가제 함유
- 도장·휠·트림 등 외장 표면에 안전
- 철분과 반응 시 보라색으로 변화
- 코팅 손상 없이 잔여물 없음
- 림·트림에 대한 탈지 작용
사용법
- 통풍이 잘 되는 곳에서 직사광선을 피해 사용합니다.
- 호스나 고압수로 느슨한 먼지를 먼저 제거합니다.
- 잘 흔들고 장갑을 착용합니다.
- 차량 표면에 W6를 직접 분무하고 3~5분간 두면 철분 입자가 녹아 보라색 용액으로 변합니다.
- 제품이 표면에서 마르지 않도록 합니다.
- 잔여물을 헹궈내고 필요 시 반복합니다.
- 심하게 오염된 부위는 MF1 ZeroR 천이나 부드러운 브러시로 가볍게 문지릅니다.
- 서늘하고 건조한 곳에 보관합니다.
- 개봉 후 12개월 이내에 사용합니다.