Ink & Dye Remover
잉크 & 다이 리무버
Geist Ink & Dye Remover is a plant and algae-based liquid cleaner for leather, PU, and PVC surfaces that lifts pen marks, ink stains, and dye transfer without the use of solvents. Rather than relying on hard rubbing, the product is applied and left to dwell so the dye floats to the surface of the liquid, protecting the leather topcoat from swelling or loss of gloss. Multiple treatments over several days may be needed for heavily stained surfaces.
가이스트 잉크 & 다이 리무버는 가죽, PU, PVC 표면의 펜 자국, 잉크 얼룩, 염료 전이를 용제 없이 제거하는 식물·조류 유래 세정 액체입니다. 강하게 문지르는 대신 제품을 도포하고 방치하면 염료가 액체 표면으로 떠오르는 방식으로 작용하여 가죽 탑코트의 부풀거나 광택이 변하는 손상을 방지합니다. 심하게 얼룩진 표면은 수일간 여러 번 처리가 필요할 수 있습니다.
- Brand
- Geist
- Categories
- Interior : Leather Cleaner
- Primary dilution
- RTU
Key features
- Solvent-free formula based on plant and algae-derived ingredients
- Lifts pen marks, ink, and dye transfer without rubbing
- Does not cause topcoat swelling or gloss change
- Can be left to work overnight for older stains
- Suitable for leather, PU, and PVC surfaces
- Not suitable for suede, nubuck, microfibre, or aniline leather
Dilution
- Interior : Leather Cleaner — RTU (1:0) (primary)
Usage
- Do not clean or wet the surface before application — apply Ink & Dye Remover directly onto pen marks or dye stains, or spread with a cloth.
- Leave the remover to work for at least 30 minutes (longer for older or heavier stains); overnight treatment may be needed for severe cases.
- Gently agitate stubborn areas with a cotton bud to help lift the loosened dye.
- Wipe off the remover with a dry absorbent cloth. Repeat the treatment if staining remains.
- For dye transfer: pour liquid onto a cloth, wipe over the affected area and leave overnight. The following day, clean gently with Geist Rapid Cleaner. Repeat daily until the desired result is achieved.
- When no staining remains, clean the surface with Geist Rapid Leather & Vinyl Cleaner or a damp cloth, then protect with Geist Dye & Friction Blocker.
핵심 특징
- 식물·조류 유래 성분 기반 무용제 처방
- 문지름 없이 펜 자국, 잉크, 염료 전이 제거
- 탑코트 팽창 또는 광택 변화 없음
- 오래된 얼룩은 하룻밤 방치 후 처리
- 가죽, PU, PVC 표면에 적합
- 스웨이드, 누벅, 마이크로파이버, 아닐린 가죽에 사용 불가
사용법
- 도포 전 표면을 세정하거나 적시지 않습니다. 잉크 & 다이 리무버를 펜 자국이나 염료 얼룩에 직접 도포하거나 천으로 펴 바릅니다.
- 최소 30분 방치합니다. 오래된 얼룩이나 심한 얼룩은 더 길게, 심한 경우 하룻밤 처리가 필요합니다.
- 완고한 부위는 면봉으로 부드럽게 문질러 느슨해진 염료를 제거합니다.
- 건식 흡수 천으로 리무버를 닦아냅니다. 얼룩이 남으면 처리를 반복합니다.
- 염료 전이의 경우: 천에 액체를 부어 해당 부위에 닦은 후 하룻밤 방치합니다. 다음 날 가이스트 래피드 클리너로 부드럽게 세정하고 원하는 결과가 나올 때까지 매일 반복합니다.
- 얼룩이 완전히 제거되면 가이스트 래피드 레더 & 비닐 클리너 또는 촉촉한 천으로 표면을 세정하고 가이스트 다이 & 프릭션 블로커로 보호 처리합니다.
Also known as: 가이스트, Geist Leather Care Ink & Dye Remover, Geist Ink & Dye Remover, 가이스트 잉크 & 다이 리무버
한국어로 보기
Sources