Easy Colour Restorer Connolly
이지 컬러 리스토러 코놀리
Geist Easy Colour Restorer Connolly is a self-crosslinking, solvent-free colour restorer matched to Connolly leather colour codes, designed to revive and refresh faded or scuffed leather and vinyl surfaces on car interiors and furniture. Applied by wiping and dabbing with a sponge, it leaves a soft satin finish without requiring a separate topcoat. The formula contains no PFOA, fluorocarbons, or nanoparticles.
가이스트 이지 컬러 리스토러 코놀리는 코놀리 가죽 색상 코드에 맞는 자기 가교형 무용제 색상 복원제로, 자동차 실내와 가구의 퇴색되거나 스크래치가 생긴 가죽·비닐 표면을 복원합니다. 스펀지로 닦아 바르는 방식으로 적용하며 별도의 탑코트 없이 부드러운 새틴 마감을 남깁니다. PFOA·불소 화합물·나노입자를 포함하지 않습니다.
- Brand
- Geist
- Categories
- Interior : Leather Sealants
- pH
- neutral (7)
Key features
- Refreshes and restores original colour on worn leather and vinyl
- Self-crosslinking formula — no topcoat required
- Easy sponge application, dab to avoid wipe marks
- Leaves a soft satin finish
- Odourless and solvent-free
- Contains no PFOA, fluorocarbons, or nanoparticles
- Available in Connolly-matched colour codes
Usage
- Prepare the surface by wiping thoroughly with Geist Degreaser D1. Allow to dry, then perform a tape test; if tape does not adhere, reclean. Lightly sand damaged areas with Geist Sanding Pad in circular motions and remove dust.
- Shake the bottle well, then wipe the colour restorer onto the leather or vinyl surface with a sponge. Dab over the applied area to prevent wipe marks. Speed up drying with a heat gun or hairdryer. Apply multiple thin layers, fully drying each before the next.
- Once dry, optionally apply Geist Dye & Friction Blocker 24 hours later for added protection in high-wear areas such as bolsters or steering wheels.
핵심 특징
- 낡은 가죽·비닐 표면의 원래 색상 복원
- 자기 가교 처방 — 탑코트 불필요
- 스펀지로 두드려 바르는 간편 적용 방식
- 부드러운 새틴 마감
- 무취 및 무용제
- PFOA·불소 화합물·나노입자 미함유
- 코놀리 색상 코드에 맞춘 색상 제공
사용법
- 가이스트 디그리저 D1으로 표면을 꼼꼼히 닦아낸 후 건조시킵니다. 테이프 테스트를 실시하여 접착이 되지 않으면 재세척합니다. 손상 부위를 가이스트 샌딩 패드로 원형 동작으로 가볍게 샌딩하고 먼지를 제거합니다.
- 병을 잘 흔든 후 스펀지에 컬러 리스토러를 묻혀 가죽 또는 비닐 표면에 바릅니다. 건조 후 얼룩이 생기지 않도록 두드려줍니다. 열풍기나 헤어드라이어로 건조를 촉진하며, 얇은 층을 여러 번 도포하되 각 층이 완전히 마른 뒤 다음 층을 바릅니다.
- 건조 후 볼스터나 스티어링 휠 등 마찰이 심한 부위에는 24시간 뒤 가이스트 다이 앤 프릭션 블로커를 추가 도포하여 보호력을 높입니다.
Also known as: 가이스트, Geist Easy Colour Restorer Connolly, Geist ECRC, 가이스트 이지 컬러 리스토러 코놀리
한국어로 보기
Sources