Orthrus PPF Ceramic Coating
Orthrus PPF 세라믹 코팅
Orthrus is a durable, flexible ceramic coating formulated for Paint Protection Film, vinyl and painted bodywork. Its reactive chemistry bonds to the surface to form a strong flexible film that guards against UV exposure, chemical agents and fine scratches. It delivers a high-gloss, hydrophobic finish with self-cleaning characteristics and is rated for up to about 2 years of durability. Suitable for painted panels, motorbikes, hard plastic parts, head and tail lights and alloy wheel rims. Not recommended on fresh aftermarket paint (allow 2–3 months), glass, textiles, tyres or soft trims.
Orthrus는 PPF, 비닐, 도장면 모두에 사용할 수 있는 내구성 있는 플렉시블 세라믹 코팅입니다. UV·화학 물질·미세 스크래치에 대응하는 강한 유연 피막을 형성하며 고광택 발수 마감과 셀프 클리닝 특성을 제공합니다. 자동차 도장 패널, 모터바이크, 하드 플라스틱, 헤드·테일라이트, 알로이 휠 림에 적합합니다.
- Brand
- Garage Therapy
- Categories
- Exterior : PPF Maintenance, Exterior : Coating
Key features
- Compatible with PPF, vinyl and painted surfaces
- Up to about 2 years durability
- Water contact angle of 107°
- Chemical resistance pH 2–11
- 3.5H hardness
- Wash marring resistance
- High gloss and slickness
- Salt, corrosion, UV and heat resistance
Usage
- Fully decontaminate and polish the surface as needed, then wipe it down with a panel prep solution before coating.
- Put on the supplied protective gloves and work in a clean, shaded, dust-free environment.
- Add a few drops of Orthrus to the supplied applicator suede and spread in a thin, even cross-hatch pattern one section at a time.
- Allow the coating to flash for the time stated in the included instructions, then buff residue with a clean plush microfibre towel followed by a second towel for a streak-free result.
- Avoid water and contaminants for the cure period in the instructions. Do not apply to fresh aftermarket paint under 2–3 months old, glass, textiles, tyres or soft trims.
핵심 특징
- PPF·비닐·도장면 호환
- 약 2년 내구성
- 물 접촉각 107°
- pH 2–11 화학 저항성
- 3.5H 경도
- 워시 마링 저항성
- 고광택 및 슬릭감
- 염분·부식·UV·열 저항성
사용법
- 코팅 전 표면을 완전히 디컨하고 필요 시 폴리싱 후 패널 프렙으로 마무리합니다.
- 동봉된 보호 장갑을 착용하고 직사광선을 피한 깨끗하고 먼지 없는 환경에서 작업합니다.
- 동봉된 어플리케이터 스웨이드에 Orthrus를 몇 방울 올리고 한 구획씩 얇고 균일하게 크로스해치 패턴으로 도포합니다.
- 동봉 설명서에 명시된 플래시 타임 후 깨끗한 마이크로파이버 타월로 잔여물을 닦고 두 번째 타월로 마감합니다.
- 설명서 기재 큐어 시간 동안 물과 오염원을 피하세요. 신규 도장면(2–3개월 미만), 유리, 텍스타일, 타이어, 소프트 트림에는 사용하지 마세요.