/ONE: Snow Foam V2
/ONE: 스노우 폼 V2
Snow Foam V2 is a highly concentrated pre-wash designed for thorough cleaning of all exterior vehicle surfaces before a contact wash. Non-caustic, biodegradable sugar-based surfactants are gentle on paint and protective coatings while penetrating and softening traffic film for easy rinsing. Next-generation additives deliver improved degreasing capability. The formula is phosphate and NTA-free, and is compatible with foam lances, pump sprayers and trigger sprayers.
스노우 폼 V2는 접촉 세차 전 차량 외부 오염물을 효과적으로 제거하기 위한 고농축 프리워시입니다. 비가성의 생분해성 슈가 기반 계면활성제가 도장면과 코팅을 보호하면서 트래픽 필름을 부드럽게 분해하고, 차세대 첨단 첨가제가 탈지 성능을 높입니다. 시트러스 계열 탈지 성분과 녹 방지제를 함유하며, 가성소다·인산염·NTA 무첨가 처방입니다.
- Brand
- Garage Therapy
- Categories
- Exterior : Foam
- Primary dilution
- 1:50
Key features
- Highly concentrated pre-wash for all exterior surfaces
- Contains citrus-based degreasing additives
- Contains rust inhibitors
- High-density foam that clings and rinses cleanly
- Compatible with foam lances, pump and trigger sprayers
- Caustic-, phosphate- and NTA-free
Dilution
- Exterior : Foam — 1:50 (1:50) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:10~1:50 (1:10-50)
Usage
- Shake well before use. Wear gloves and eye protection and perform a spot test on an inconspicuous area first.
- Rinse the vehicle thoroughly with pressurised water to remove loose surface dirt.
- Dilute approximately 1 part product to 10 parts water in a foam lance bottle, adjusting concentration to match soiling level.
- Apply evenly to all surfaces with a foam lance to form a thick, clinging layer of foam.
- Allow to dwell for about 5–6 minutes. Do not apply in direct sunlight or on hot surfaces and do not allow the product to dry.
- Rinse thoroughly with pressurised water.
핵심 특징
- 외장 전체 표면을 위한 고농축 프리워시
- 시트러스 기반 디그리징 첨가제 함유
- 녹 방지제 함유
- 고밀도 클링 폼과 깔끔한 헹굼성
- 폼랜스·펌프·트리거 스프레이어 모두 호환
- 가성소다·인산염·NTA 무첨가
사용법
- 사용 전 잘 흔들고, 장갑과 보안경을 착용한 후 눈에 띄지 않는 부위에 먼저 테스트합니다.
- 고압수로 차량을 충분히 헹궈 표면의 큰 오염물을 제거합니다.
- 폼랜스 보틀에 제품 1 : 물 10 비율로 희석합니다(오염 정도에 따라 조정 가능).
- 폼랜스로 차체 전면에 두꺼운 폼이 균일하게 덮이도록 도포합니다.
- 약 5~6분간 반응시킵니다. 직사광선이나 뜨거운 표면에서는 사용하지 말고 폼이 마르지 않도록 주의합니다.
- 고압수로 깨끗이 헹궈냅니다.