Original Grit Guards
Paint swirls often result from re-contaminating a wash mitt in a dirty bucket. The Original Grit Guard is a raised radial-grid insert for the base of a standard 5 gallon bucket. Dragging the mitt across the grid dislodges trapped dirt, which then sinks below the grid and stays there, keeping your wash water cleaner throughout the session. Stacking two Grit Guards raises the grid higher, adding separation between the clean water above and settled sediment below.
버킷 안에서 미트를 재적실 때 오염된 물이 도장에 다시 닿아 스월 마크가 생기는 경우가 많습니다. 오리지널 그릿 가드는 5갤런 버킷 바닥에 거치하는 방사형 격자 인서트로, 미트를 격자 위에 문지르면 모래와 오염물이 분리되어 격자 아래에 가라앉습니다. 두 개를 겹치면 깨끗한 물과 오염된 물 사이의 간격이 더 넓어집니다.
- Brand
- Garage Therapy
- Categories
- Tools : Wash Supplies
Key features
- Radial grid insert traps dirt and grit at the bucket base
- Reduces swirl marks from wash mitt recontamination
- Fits standard 5 gallon buckets
- Stack two for increased water separation
- Four-quadrant base stabilises water in the bucket
Usage
- Place the Grit Guard flat on the bottom of your wash or rinse bucket.
- Optionally stack a second Grit Guard on top for greater separation between clean and contaminated water.
- After washing each panel, rub the mitt across the grid surface to release dirt, which settles below the grid.
- Avoid submerging the mitt below the Grit Guard so contaminants remain trapped at the bottom.
- Rinse the Grit Guard with clean water after each wash session.
핵심 특징
- 방사형 격자가 버킷 바닥에 오염물을 가두어 미트 재오염 방지
- 스월 마크 위험 감소
- 표준 5갤런 버킷에 맞게 설계
- 두 개 겹침으로 청정·오염 구역 간격 확대
- 4구획 베이스가 버킷 내 물을 안정시킴
사용법
- 워시 또는 린스 버킷 바닥에 그릿 가드를 수평으로 올려 놓습니다.
- 필요에 따라 두 번째 그릿 가드를 위에 겹쳐 청정 구역을 더 넓게 확보합니다.
- 각 패널 세척 후 미트를 격자 위에 문질러 오염물을 분리하고 격자 아래로 가라앉도록 합니다.
- 미트를 그릿 가드 아래까지 담그지 않아 오염물이 버킷 바닥에 머물도록 합니다.
- 세차 후 그릿 가드를 깨끗한 물로 헹궈 보관합니다.